Switchmode/High Frequency Gate Drive Transformers GDE25-3 Description: Triad gate drive transformers are used universally in all high frequency switching topologies to isolate the control circuitry from the line-connected switches. The Windings are interleaved for the lowest possible leakage inductance. Turn ratios optimize coupling and enhance performance. Available with single or dual secondaries, these transformers are constructed of UL rated 130 materials and are easily standardized at operating frequencies of 200 kHz and beyond. Electrical Specifications ( 25C): Max Max Min. Max. Min. Turns DCR 1-2 DCR Gate ET Product Leakage Inductance Ratio .875 .350 840 VSec 3.5 H 1.50 mH 1.5:1 1.100 Weight: .045 oz. 1.20 Technical Notes: 1. Drive to gate winding hi-pot tested at 3,750 VRMS025 SQ 2. Derate ET product by 32% for 50 kHz, 50% for 100 kHz and for .150 MIN .280 MAX unidirectional operation. 3. Operation at rated current per winding renders approximately 40 temperature rise700 1.040 .600 Schematic: .200 .650 .850 1 3 GATE DRIVE .700 26 2 .040 DIA TYP 1 .600 6354 .200 2 PLCS .850 RoHS Compliance: As of manufacturing date February 2005, all standard MOUNTING HOLE PATTERN TOP VIEW products meet the requirements of 2002/95/EC, known as the RoHS initiative. * Upon printing, this document is considered uncontrolled. Please contact Triad Magnetics website for the most current version. Web: www.TriadMagnetics.com 22520B Temescal Canyon Road Phone 951-277-0757 Corona, California Publish Date: July 28, 2010 Fax 951-277-2757 92883