Highlights BC Pro 120V 600VA 345W Standby UPS, Tower, 600VA tower 120V standby UPS USB port, 6 Outlets Maintains AC output during power failures MODEL NUMBER: BCPRO600 3 UPS battery supported outlets, 3 surge-only outlets USB port, TEL/DSL/ethernet protection, 97% efficient NEMA 5-15P input plug and 6 NEMA 5-15R outlets Package Includes BCPRO600 Standby UPS System USB cable Phone cable Instruction manual Description Tripp Lite s BCPRO600 standby UPS offers complete power protection for desktop PCs, network workstations and a wide variety of consumer and professional electronics. Uninterruptible Power Supply / UPS circuits switch to battery backup mode within milliseconds to keep connected equipment running without interruption or data loss during power failures. Surge-only outlets offer convenient protection for printers and other desktop accessories not requiring battery support. AC and dataline surge suppression prevents connected equipment damage. USB communications port supports built-in power management and auto-shutdown features of Windows and Mac OS X or full featured monitoring and data-saving auto-shutdown options using Tripp Lite s free PowerAlert monitoring software. Features BCPRO600 tower 120V standby UPS offers AC power protection from blackouts, brownouts, overvoltages and transient surges 600VA / 345 watt UPS output capacity Uninterruptible Power Supply / UPS operation maintains battery-derived AC output during blackouts, brownouts and overvoltages to prevent data loss and system downtime for connected equipment Built-in USB port enables data-saving unattended shutdown when used with Tripp Lite s PowerAlert software, available via FREE download from www.tripplite.com/poweralert HID-compliant USB port also enables integration with built-in power management and auto shutdown features of Windows and Mac OS X 5.7 minutes runtime at 100% load (345 watts), 14.5 minutes runtime at 50% load (175 watts) 42 minutes runtime for a desktop computer system consuming 80 watts continuous 6 built-in total NEMA 5-15R outlets 3 UPS battery backup outlets, plus 3 additional surge-only outlets Right angle NEMA 5-15P input connection with 6ft / 1.8m line cord Network grade AC surge and lightning protection is available from all outlets Built-in data line surge suppression protects a single dialup, DSL or ethernet line 97% line mode efficiency rating uses less energy and BTU emissions Supports Tripp Lite s Watchdog system service to restore operation to locked equipment through soft reboot of application/OS or hard power off/on reboot of connected equipment, ideal for unattended kiosk applications Front panel LEDs indicate line / battery mode and battery replace status Audible alarm with alarm cancel / self-test button 1 / 5 Front panel LEDs indicate line / battery mode and battery replace status Audible alarm with alarm cancel / self-test button Hot swappable user battery replacement Optional PDUB15 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment Small tower housing supports desk or floor placement Specifications OUTPUT Output Volt Amp Capacity (VA) 600 Output Watt Capacity (Watts) 345 Nominal Output Voltage(s) 110V 115V 120V Supported Nominal Voltage Details 115v nominal output in battery mode Frequency Compatibility 60 Hz Output Voltage Regulation (Battery +/- 5% Mode) Output Receptacles (6) 5-15R UPS Output Receptacles (Surge 3 UPS outlets, 3 surge-only outlets Suppression Only) Hot-Swap PDU options PDUB15 (2U / 8 5-15R outlets) Output AC Waveform (AC Mode) Sine wave Output AC Waveform (Battery Mode) PWM sine wave INPUT Rated input current (Maximum Load) 12A Nominal Input Voltage(s) Supported 120V AC UPS Input Connection Type 5-15P Right-Angled UPS Input Cord Length (ft.) 6 UPS Input Cord Length (m) 1.8 Recommended Electrical Service 15A 120V Input Phase Single-Phase BATTERY Full Load Runtime (min.) 5.7 min. (345w) Half Load Runtime (min.) 14.5 min. (175w) DC System Voltage (VDC) 12 Battery Recharge Rate (Included Less than 4.5 hours from 10% to 90% Batteries) 2 / 5