Highlights Isolator Series 120V 500W Isolation Transformer- Complete line isolation, noise Based Power Conditioner, 4 Outlets filtering and surge suppression MODEL NUMBER: IS500 is ideal for sensitive equipment 500 watts, 4 outlets, 6-ft. power cord Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases Package Includes IS500 Isolation transformer system Instruction manual with warranty information Description Tripp Lite Isolator series isolation transformer-based power conditioners offer complete line isolation, continuous noise filtering and enhanced normal and common mode surge suppression. Internal low- impedance isolation transformer component with Faraday Shield offers 100% isolation from the input AC line. Secondary neutral to ground bonding eliminates common mode noise, providing an isolated ground reference for sensitive equipment and an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades. Removes EMI/RFI noise, utility switching transients, background spikes generated by other on-site loads and utility or related surge conditions. Additional surge suppression components placed at both the line input and transformer output combined with full line isolation offers continuous line filtering of a full range of power line noise in all modes. Continuous transformer filtering with no wearable parts uniquely reduces surges in the worst of power environments to harmless levels. Reduces 6000V IEEE C62.41 Cat A&B ring wave and combination wave test surges to only 0.5V common mode. Model IS500 offers 500 watts capacity with 4 widely spaced output receptacles, a 6-ft power cord, circuit breaker overload protection and lighted power switch. Rugged all-metal unit housing ships ready for upright tower or wallmount placement in industrial, medical, office or network environment. Features Tripp Lite Isolator series isolation transformer-based power conditioners offer complete line isolation, continuous noise filtering and enhanced common mode surge suppression Supports combined loads up to 500 watts continuous/4.2A at 120V Isolation transformer with Faraday Shield offers 100% isolation from the input AC line Neutral to ground bonding at the secondary eliminates common mode noise and provides an isolated ground reference for sensitive equipment Isolation transformer design serves as an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades Removes EMI/RFI noise, utility switching transients, background spikes and power problems generated by other on-site loads, utility grid-switching and related surges Line isolation with additional surge suppression components offer continuous line filtering of a full range of power line noise in all modes 1 / 3 Continuous transformer filtering with no wearable parts reduces surges in the worst of power environments to harmless levels Includes 4 widely-spaced NEMA5-15R output receptacles, 6 ft power cord, circuit breaker overload protection and lighted power switch Rugged all-metal housing ships ready for upright tower or wallmount installation Specifications OVERVIEW UPC Code 037332070050 Efficiency 96% Let-through Voltage (Combination L-N: <130V L-G: <10V N-G: <0.5V IEEE C62.41 Cat. B Wave) Let-through Voltage (Ring Wave) L-N: <10V L-G: <10V N-G: <0.5V IEEE C62.41 Cat. A Nominal Voltage / Frequency 120V / 60Hz Over Current Protection Yes, 4.5A circuit breaker Surge Test Conditions Per ANSI/IEEE C62.41 - (IEEE587) Cat. A & B test waveforms Total Harmonic Distortion less than 1% VA / Watt Capacity 500 Suppression Joule Rating 680 Transformer Type Low impedence isolation transformer INPUT Input Plug Type NEMA 5-15P Input Cord Length (ft.) 6 Input Cord Length (m) 1.83 OUTPUT Output Receptacles (4) 5-15R Output Amp Capacity 4.2 SURGE / NOISE SUPPRESSION Noise Suppression Rating 33-65dB normal mode > 80dB common mode PHYSICAL Cooling Method Convection Form Factors Supported Tower 2 / 3