Resistors Changes to add 2817 size Resistors Power Metal Foil on Ceramic Chip Resistors Bullet Points Metal Foil on Ceramic Change rst 2 points as shown: Small size down to 0603 Chip Resistors TCR down to 30ppm/C MFC2817 Series Current sensing for power electronics MFC Series High power density Compact size 5W shunt Small size down to 0603 TCR down to 30ppm/C TCR down to 30ppm/C Current sensing for power electronics Current sensing for power electronics High power density Electrical Data High power density MFC2817 Not Recommended for New Designs All All parts parts arare e Pb-Pb-frfree ee and and ccomply omply with with EU EU DirDirectivective e 2011/65/EU 2011/65/EU amended amended bby y (EU) (EU) 2015/863 2015/863 (R(RoHS3)oHS3) 0603 2817 0.5 3 Power ra ng 70C W 0.33 2.5 15 ElectriOvecrlal Doad raangta 5s W 0.5 Resistance range m 5 to 20 2817 3 to 150 W 5 Standard values m 5, 7, 9, 10, 20 E24 preferred, other values on request W 25 Tolerance % 1, 5 Resistance range m 3 to 150 50 30 TCR ppm/C Standard values m E24 preferred Opera ng temperature C -55 to +155 Tolerance % 1 TCR (+25C to +125C) ppm/C 30 C -55 to +155 t Physical Data Replacemen Physical Data drawing Dimensions in mm and nominal weight in mg Dimensions in mm and weight in mg L W H A L W H A B Wt. B Wt. nom Size Size 0.30 0.25 0.20 max 0.20 0.20 0.20 max nom 0603 1.6 0.8 0.6 0.6 0.40.2 3.3 2817 7.1 4.2 0.7 1.0 1.30.5 80 to 140 2817 7.1 4.2 0.7 1.0 1.30.5 80 to 140 raarpo Construc on Recommended Pad Dimensions Metal foil resistor material is bonded onto a 96% alumina substrate and protected. W- und termina ons have an electroplated nickel barrier and solder coa ng. 0603 size parts have the foil on the upper surface whilst 2817 size parts Metal foil resistor material is bonded onto the underside of a 96% alumina have the foil on the lower surface. L substrate and protected. Wrap-around terminaons have an electroplated nickel barrier and solder coang. B Marking Marking0603 size parts are not marked. 2817 size parts are marked with ohmic value only. Reels are marked with type, valuAe, tolerance, date code and quan ty. MFC2817 parts are marked with ohmic value only. Reels are marked with type, value, tolerance, date code and quanty. Recommended Pad Dimensions Cu Trace Sensing Trace Solvent Resistance All dimensions in mm All dimensions in mm suitable for printed circuits. Size Resistance m A L B Size Resistance m A L B 2817 All 4.6 8.0 4.6 5 & 20 0.6 0603 1.0 2.8 Others 0.85 2817 All 4.6 8.0 4.6 General Note BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. General Note BI Technologies IRC Welwyn All information is subject to TT Electronics own data and is considered accurate at time of going to print. www.ttelectronics.com/resistors All information is subject to TT Electronics own data and is considered accurate at time of going to print. Metal Foil on Ceramic Chip Resistors Metal Foil on Ceramic Chip Resistors erfoResistrmanceors Data Power Metal Foil on Ceramic Chip Resistors rameter Maximum MFC Series MFC Series ad atMF ratedC2817 Series power: 1000 hours at 70C, cyclic load R% 1 Performance Data verload: 5 x rated power for 5 seconds R% 1 Parameter Maximum oisture: No load, 1000 hours 85C, 85% RH R% 1 Performance Data Performance Data Load at rated power: 1000 hours at 70C, cyclic load R% 1 mperature rapid change: 100 cycles, -55C & 155C R% 1 Maximum (+0.001) Overload: 5 x rated power for 5 seconds R% 1 gh temPpaerramatuertere exposure: 1000 hours at 155C R% 1 Parameter Maximum 2817 Moisture: No load, 1000 hours 85C, 85% RH R% 1 w temperature exposure: 1000 hours at -55C R% 1 Load at rated power: 1000 hours at 70C, cyclic load R% 1 R% 5 Temperature rapid change: 100 cycles, -55C & 155C R% 1 nd stOreverload: 5 x ngth: 2mm rdaeted pec oonw er for 5 seconds R% R% 0.5 1 R% 5 High temperature exposure: 1000 hours at 155C R% 1 sistaMoinces ttuor e: No load, 1000 housolder heat: 2605Cr fs 85or 10Cs , 85% RH R% R% 0.5 1 R% 1 R% Low temperature exposure: 1000 hours at -55C R% 1 Temperature rapid change: 100 cycles, -55C & 155C R% 1 lderability: 2455C for 2s 95% coverage R% 0.5 Bend strength: 2mm deec on R% 0.5 High temperature exposure: 1000 hours at 155C R% 1 sula on resistance: 100V DC for 1min ohms >100M R% 1 Resistance to solder heat: 2605C for 10s R% 0.5 Low temperature exposure: 1000 hours at -55C R% 1 R% 1 R% Solderability: 2455C for 2s R% 95% covera0.5ge R% 1 RInesisustlaance ont o solder heresistance:a t: 2605C 100V DC for 1fmor 10sin R% ohms 0.5 >100M e-ra ng Curve R% 0.5 Solderability: 2455C for 2s 95% coverage ohms >100M ohms >100M De-ra ng Curve Thermal Data Typical Temperature Rise Proporon of Rated Power (mounted on high T FR4 board) g Temperature Derang 175 Hotspot, R100 150 100% Hotspot, R003 125 80% 100 60% 75 40% Terminal, R003 50 Terminal, R100 20% 25 0 0% 0% 20% 40% 60% 80% 100% ackaging 0 50 100 150 Terminal Temperature (C) 0603 size resistors are supplied on 8mm paper carrier tape, all on 7 inch reels as per IEC 286-3. The 0603 size has 5000 chips per reel. Proporon of Rated Power Packaging Packaging 0603 size resistors are supplied on 8mm paper carrier tape, all on 7 inch reels as per IEC 286-3. The 0603 size has 5000 chips per reel. Ordering Procedure Ordering Procedure Ordering Procedure m Packaging Example: MFC0603-R005FT5 (MFC0603, 5 milliohms 1%, Pb-free) ple: MFC0603-R005FT5 (MFC0603, 5 milliohms 1%, Pb-free) 0603 size resistors are supplied on 8mm paper carrier tape, all on 7 inch reels as per IEC 286-3. The 0603 size has 5000 chip Example: MFC2817-R01FT1 (MFC2817, 10 milliohms 1%, Pb-free) MFC2817 resistors are supplied on 12mm embossed carrier tape, on 7 inch reels as per IEC 286-3. Ordering Procedure M F C 2 8 1 7 - R 0 1 F T 1 s per reel. 1 2 3 4 Example: MFC0603-R005FT5 (MFC0603, 5 milliohms 1%, Pb-free) 1 2 3 4 Type Value Tolerance Packing M F C 0 6 0 3 - R 0 0 5 F T 5 MFC2817 F = 1% T1 1000/reel E24 = 3/4 characters R = ohms 1 2 3 4 5 1 2 3 4 5 Series Size Value Tolerance Packing MFC 0603 F = 1% T5 0603 5000/reel 3/4 characters R = ohms J = 5% General Note BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics own data and is considered accurate at time of going to print. www.ttelectronics.com/resistors TT Electronics plc 10.20 Proportion of Pr Temperature Rise (C)