PLCC-2 Pkg Infrared Light Emitting Diode OP180 & OP280 Series Features: SMD Package High power GaAsOP180, 940 nm typical peak wavelength Standard GaAlAs-OP280, 890nm typical peak wavelength High power GaAIAsOP280K and OP280KT, 875 nm typical peakwavelength VCSEL GaAlAs-OP280V, 850 nm typical peak wavelength Point Source GaAlAs-OP280PS, 850 nm typical peakwavelength LCC-2 package style with silicon encapsulation Half Power Beam angle from 18 to 100 Variety of power ranges Suitable for single device or array applications Moisture Sensitivity Level: MSL2 or > Description: The OP180 is a GaAs and the OP280 series are GaAlAs infrared LED mounted in plastic leadless PLCC-2 SMD package with a flat lens window that allows for wide beam angles. All parts endure the attribute of silicone encapsulation to increase the longevity of the product. The OP280V is a high performance 850nm vertical cavity surface emitting laser (VCSEL). This device requires substantially lower current to achieve same amount of output power as LEDS. Its high speed, high output makes it versatile with low input current. The OP280PS features a point source irradiance pattern, stable forward voltage over temperature and low rise and fall times, making it ideal for high speed operations. The OP280K and the OP280KT are high performance, high speed, high power IRLEDS. The OP280KT utilizes double hetero junction technology with reverse polarity terminals. The low power consumption PLCC-2 packaging is suitable for single device or array applications. The 180 and 280 Series LEDs are mechanically and spectrally matched to OP580 series phototransistors. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Applications: Ordering Information Non-contact position sensing Machine automation Part Apertured I LED Peak Half Power F 2 Number Power (mW/cm ) (mA) Wavelength Angle Datum detection Optical encoding Light curtains IR illumination OP180 0.50 20 940 nm 100 Photoelectronic sensors Night vision systems OP280 0.50 20 890 nm 100 OP280KT 0.85 20 850 nm 90 OP280K 0.85 20 875 nm 90 OP280PS 0.15 20 850 nm 50 OP280V 2.50 7 850 nm 18 1 1 Pin 1 (Anode or Cathode 2 2 OP280 OP180 OP280K OP280KT OP280PS OP280V Pin OP180 OP280 OP280KT OP280K OP280PS OP280V 1 Cathode Anode Cathode Anode Anode Cathode 2 Anode Cathode Anode Cathode Cathode Anode OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue B 07/2012 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 8 Infrared Light Emitting Diode OP180 & OP280 Series Absolute Maximum Ratings (T =25 C unless otherwise noted) A o o Storage Temperature Range -40 C to +100 C o o Operating Temperature RangeOP180, OP280, OP280K, OP280KT, OP280PS -25 C to +85 C o o OP280V 0 C to +70 C Reverse Voltage OP180, OP280, OP280PS, OP280V 5.0 V OP280K, OP280KT 4.0 V Peak Forward Current 1s pulse width, 300 pps (Except OP280V) 1.0 A (1) Lead Soldering Temperature 1/16 inch (1.6 mm) from case for 5 seconds with soldering iron 260 C (2) Power Dissipation 130 mW Electrical Characteristics (T = 25 C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode Radiant Incidence (3) OP180 0.50 - - IF = 20 mA (3) OP280 0.50 - - I = 20 mA F (3) E OP280K 0.65 - - I = 20 mA E (APT) F 2 (3) mW/cm OP280KT 0.65 - - I = 20 mA F (3) OP280PS 0.10 - - I = 20 mA F (3) OP280V 1.50 - - I = 7 mA F Forward Voltage OP180 - 1.28 1.60 I = 20 mA F OP280 - - 1.50 I = 20 mA F V OP280K - 1.50 1.80 V I = 20 mA F F OP280KT - 1.55 1.80 I = 50 mA F OP280V - 1.95 2.50 I = 7 mA F OP280PS - 1.50 1.80 I = 20 mA F I Reverse Current - - 100 A V = 5.0 V R R Wavelength at Peak Emission - 940 - I = 20 mA F OP180 - 890 - OP280 - 850 - P OP280KT nm - 875 - OP280PS, OP280K - 850 - I = 7 mA F OPOP280V Emission Angle at Half Power Points OP180, OP280, OP280K, OP280KT - 100 - I = 20 mA F HP OP280PS - 90 - Degree I = 20 mA F OP280V - 18 - I = 7 mA F Output Rise Time - ns OP180, OP280K, OP280KT, OP280PS - 500 t - ns r OP280 - 700 I =50 mA, PW=10 s, and D.C.=10.0% 100 ps F(PK) OP280V - - I =5 mA, PW=10 s, and D.C.=10.0% F(PK) (For OP280V) Output Fall Time OP180, OP280K, OP280KT, OP280PS - 500 - ns t f OP280 - 700 - ns OP280V - - 100 ps Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. Derate linearly at 2.17 mW/ C above 25 C. 3. E is a measurement of the apertured radiant incidence upon a sensing area 0.081 (2.06 mm) in diameter, perpendicular to and E(APT) centered on the mechanical axis of the lens and 0.590 (14.99 mm) from the measurement surface. E is not necessarily uniform within E(APT) the measured area. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 07/2012 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 8 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com