High Reliability NPN Silicon Phototransistor OP602, OP603, OP604 (TX, TXV) OP604 (S) Features: Miniature hermetically sealed package Wide range of collector currents Product Photo Here Ideal for direct mounting to PCBoard TX, TXV & S devices are processed to MIL-PRF-19500 Description: Each device in the OP600 high reliability series consists of a high-reliability NPN silicon phototransistor that is mounted in a glass-lensed miniature hermetically sealed pill package with an 18 half angle, as measured from the optical axis to the half-power point. After electrical testing by manufacturing, devices are processed to OPTEKs 100 percent screening program, which is patterned after MIL-PRF-19500. Components in the high reliability OP600 series are mechanically and spectrally matched to the OP223 and OP224 high reliability series of infrared emitting diodes. TX, TXV and S devices are processed to OPTEKs military screening program patterned after MIL-PRF-19500. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) and to Application Bulletin OP202 for pill-type soldering to PCBoard. Applications: Light Current Part I (mA) V Input Power Viewing C(ON) CE Non-contact reflective object sensor 2 Number Min / Max Typ / Max E (mW/cm ) Angle E Assembly line automation OP602TX 2.00 / 5.00 Machine automation OP602TXV Machine safety OP603TX 4.00 / 8.00 End of travel sensor OP603TXV 5 / 50 20.0 35 Door sensor OP604S OP604TX 7.00 / NA OP604TXV 1 .123 3.12 .111 2.82 2 Pin Sensor 1 Collector/Cathode 2 Emitter/Anode MILLIMETERS DIMENSIONS ARE IN: INCHES OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A 08/2010 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors OPTEKinc.com www.OPTEKinc.com Page 1 of 2 High Reliability NPN Silicon Phototransistor OP602, OP603, OP604 (TX, TXV) OP604 (S) Absolute Maximum Ratings (T =25C unless otherwise noted) A Storage Temperature Range -65 C to +150 C Operating Temperature Range -55 C to +125 C Collector-Emitter Voltage 50 V Emitter-Collector Voltage 7.0 V (1) Soldering Temperature (5 seconds with soldering iron) 260 C (2) Power Dissipation 50 mW Electrical Characteristics (T = 25C unless otherwise noted) A Input Diode SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS On-State Collector Current OP602TX, OP602TXV 2 5 2(3)(4) I - mA V = 5.0 V, E = 20 mW/cm C (ON) CE E OP603TX, OP603TXV 4 8 OP604TX, OP604TXV, OP604S 7 - - - 25 nA V = 10.0 V, E = 0 CE E I Collector Dark Current CEO - - 100 A V = 30.0 V, E = 0 T = 100 C CE E A V Collector-Emitter Breakdown Voltage 50 - - V I = 100 A, E = 0 (BR)CEO C E V Emitter-Collector Breakdown Voltage 7 - - V I = 100 A, E = 0 (BR)ECO C E (2)(3)(4) V Collector-Emitter Saturation Voltage - - 0.4 V I = 0.4 mA, E = 20 mW/cm CE(SAT) C E t Rise Time - - 20 f V = 30 V, I = 1.00 mA, CC C s (2)(3)(4) RL = 100 t Fall Time - - 20 r Notes: (1) Refer to Application Bulleting 202, which discusses proper techniques for soldering pill-type devices to PCBoards. (2) No clean or low solids. RMA flux is recommended. Duration can be extended to 10 seconds maximum when wave soldering. (3) Derate linearly 0.5 mW/ C above 25 C. (4) Junction temperature maintained at 25 C. (5) Light source is an unfiltered tungsten lamp operating at CT=2870 K or equivalent source. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 08/2010 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 2 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors OPTEKinc.com www.OPTEKinc.com