0.125 (3.175 mm) slot width Choice of aperture (0.050 or 0.010 width) Choice of opaque or IR transmissive shell material Choice of mounting configurations Choice of lead spacing or wires The slotted optical sensors in this series provide the flexibility of a custom device from a standard product line. Building from a standard housing with a 0.125 (3.18mm) wide slot, the user can specify output logic state, output driver circuit, aperture width, aperture surface and mounting tab locations. Furthermore, an option of wire or PCB leads allows electrical interface flexibility. The device body is an opaque plastic which minimizes sensitivity to both visible and near -infrared external light sources which may impact operation. Aperture width choices provide different optical resolution for motion sensing. A covered aperture provides dust protection, while an open aperture provides maximum protection against external light sources. Phototransistor sensor devices are: OPB360, OPB370, OPB380, OPB390, OPB859, OPB860, OPB870, OPB880, OPB890. The OPB355 provides a photodiode detector, which has a lower linear output-versus-light. Wide electrical output current ranges are available. LED emissions are near-infrared (850-940nm). Custom electrical, wire and cabling services are available. Contact your local representative or OPTEK for more information. Compliant to EU RoHS Directive 2002/95/EC. OPB360, OPB370, OPB380, OPB390 OPB859 OPB355 Non-contact object sensing OPB860, OPB870, OPB880, OPB890 1 3 Assembly line automation 1 3 Machine automation Equipment safety Machine safety 2 4 2 4 Wire Colors Color Description 1 Red CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries Vibra-Tite for thread-locking. ND 2 Black Vibra-Tite Formula 3 evaporates fast without causing structural failure in OPTEKs molded 3 White plastics. Applies to: OPB360, OPB370, OPB380, OPB390 4 Green and OPB860, OPB870, OPB880, OPB890. Ro HS Part Number Guide OPB355 OPB 3 X X X Mounting Configurations: Optek Assembly L - Emitter side mounting tab only N - No mounting tabs P - Sensor side mounting tab only Phototransistor Output Family T - Two mounting tabs Part Number Guide OPB360 / OPB370 OPB 3 X X X X X Optek Assembly Sensor Aperture: 1 - 0.010 (0.254 mm) 5 - 0.050 (1.270 mm) Phototransistor Output Family Emitter Sensor: 1 - 0.010 (0.254 mm) 5 - 0.050 (1.270 mm) Discrete Shell Material: 6 - Covered (apertures not visible), PCB leads Mounting Configurations: 7 - Open (apertures visible), PCB leads L - Emitter side mounting tab only N - No mounting tabs P - Sensor side mounting tab only T - Two mounting tabs Lead Spacer Designator: 0 = 0.320 (8.12 mm) lead space 5 = 0.220 (5.59 mm) lead space Part Number Guide OPB380 / OPB390 OPB 3 X 0 X X X Z Optek Assembly RoHS Compliant Sensor Aperture: 1 - 0.010 (0.254 mm) Phototransistor Output Family 5 - 0.050 (1.270 mm) Emitter Sensor: Discrete Shell Material: 1 - 0.010 (0.254 mm) 8 - Covered (apertures not visible), Wires 5 - 0.050 (1.270 mm) 9 - Open (apertures visible), Wires Mounting Configurations: L - Emitter side mounting tab only N - No mounting tabs P - Sensor side mounting tab only T - Two mounting tabs