Photologic Slotted Optical Switch OPB460, OPB470, OPB480, OPB490 Series Features: Choice of pins or wires mounting configuration Choice of aperture Choice of output configuration Choice of opaque or IR transmissive shell material Data rates to 250 kBaud Low power consumption Description: The OPB460, OPB470, OPB480 and OPB490 series of Photologic photo integrated circuit switches provide optimum flexibility for the design engineer. Building from a standard housing with a 0.125 (3.180 mm) wide slot, a user can specify the type and polarity of TTL output, discrete shell material, aperture width and choice of mounting configurations. OPB460 through OPB473 have 0.425 (10.795 mm) PCBoard leads with 0.320 (8.1 mm) spacing. OPB480 through OPB493 have 24 (609 mm) 26 AWG wires (UL approved wires). All devices in this series exhibit performance over supply voltages ranging from 4.5 V to 16.0 V, and may be specified as buffered or inverted with 10 kW Pull-up or Open Collector output. Devices are also TTI/LSTTL compatible and can drive up to 10 TTL loads. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: Mechanical switch replacement Speed indication (tachometer) Part Number Guide OPB460, OPB470, OPB480, OPB490 Series Mechanical limit indication Edge sensing OPB 4 X X X 1 1 X OPTEK Assembly All PCBoard Versions RoHS Compliant: Z = Wire Version RoHS Compliant Photologic Sensor Family Sensor Aperture: Discrete Housing Material: 1 = 0.010 0.25 mm 6 Transmissive Shell, PCBoard Mountable 7 Opaque Shell, PCBoard Mountable Emitter Aperture: 8 Transmissive Shell, Wire Termination 1 = 0.010 0.25 mm 9 Opaque Shell, Wire Termination Mounting Configurations: L Emitter side mounting tab only Electrical Specifications: 0 Buffered 10 k Output N No mounting tabs 1 Buffered Open-Collector Output P Sensor side mounting tab only T Two mounting tabs 2 Inverted 10 k Output 3 Inverted Open-Collector Output OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.1 12/06 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 7 Photologic Slotted Optical Switch OPB460, OPB470, OPB480, OPB490 Series ColorPin Description Red1 Anode Black2 Cathode Green3 Ground Blue4 Output White5 Vcc MILLIMETERS DIMENSIONS ARE IN: INCHES CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEKs molded plastics. Applies to: OPB460, OPB470, OPB480, OPB490. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 12/06 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 7 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com