OPB830W51Z TT Electronics

Slotted Optical Switch OPB830 and OPB840 Series (L & W) Features: L Package 0.125 (3.18 mm) wide slot Choice of electrical output parameters Product Photo Here Choice of aperture Choice of opaque or IR transmissive shell material Side mount configuration Choice of lead spacing (L Series) W Package 24 610 mm 26 AWG wire leads (W Series) Description: OPB830 and OPB840 series provide the design engineer with the flexibility of a custom device from a standard product line. The L Series offers a choice of PCBoard mount lead spacing, while the W Series offers 24 (610mm) 26AWG wire leads. Building from a standard housing that utilizes a .375 (9.5 mm) wide slot, a user can specify the electrical output parameters, choice of aperture, discrete shell material, side mount configuration, and a choice of lead spacing (for the L Series) or 24 610 mm UL approved 26 AWG wire leads (W Series). Housings are made from an opaque grade of injection-molded plastic that minimizes the assemblys sensitivity to visible and near-infrared ambient radiation. Discrete shells (exposed on the parallel faces inside the device throat) are made of either IR transmissive plastic (for applications where aperture contamination may occur) or of opaque plastic with aperture openings (for maximum protection against ambient light). Switching of the phototransistor occurs whenever an opaque object passes through the slot and interrupts the beam. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for Applications: Non-contact interruptive object sensing Assembly line automation Machine automation Equipment security Machine safety OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.2 10/08 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 8 Slotted Optical Switch OPB830 and OPB840 Series (L & W) OPB830/840L Series 1 3 2 4 Pin / Color Description 1 / Black Cathode OPB830/840W Series 2 / Red Anode 3 / White Collector 4 / Green Emitter MILLIMETERS DIMENSIONS ARE IN: INCHES OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 10/08 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 8 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com