Fiber Optic Detector OPF79X Series Features: High speed, low capacitance Popular ST style receptacle Pre-tested with fiber to assure performance Component pre-mounted and ready to use 100MHz operation minimum Description: The OPF79X is a low noise silicon PIN photodiode mounted in a low cost package for fiber optic applications. It offers fast response at moderate bias and is compatible with LED and laser diode sources in the 800-1000 nm wavelength region. Low capacitance improves signal to noise performance in typical short haul LAN applications. The OPF79x series is designed to be compatible with multimode optical fibers from 50/125 to 200/300 microns. Applications: Industrial Ethernet equipment Copper-to-fiber media conversion Intra-system fiber optic links Video surveillance systems Package Material Part Number Body Material Body Style OPF792 Conductive Plastic ST OPF794 Zinc, Die Cast ST-LP ST is a registered trademark of AT&T. Ro HS General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.optekinc.com www.ttelectronics.com considered accurate at time of going to print. Issue E 09/2019 Page 1 TT electronics plc Fiber Optic Detector OPF79X Series Mechanical Data - OPF792 MILLIMETERS DIMENSIONS ARE IN: INCHES General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.optekinc.com www.ttelectronics.com considered accurate at time of going to print. Issue E 09/2019 Page 2 TT electronics plc