Miniature Surface Mount LEDOPR5200 PhototransistorOPR5500 Features: Stackable on 2 mm centers Vertical or horizontal mounting Automatic pick-and-place compatible Combine OPR5200 and OPR5500 to create miniature switch Description: The OPR5200 is a miniature high efficiency GaAIAs light emitting diode in a high temperature polyamide chip carrier that is well suited to space-limited applications which require close channel spacing. The OPR5500 is a miniature NPN silicon phototransistor housed in a high temperature polyamide chip carrier that is well suited to space-limited applications which require close channel spacing. When combing the OPR5200 and OPR5500 (miniature phototransistor), this lateral mounting option can be used to create a non-focused reflective or slotted switch configuration. These parts can be automatically placed with standard SMD equipment and can be reflow soldered by virtually any conventional means. Wraparound contacts allow it to be mounted face up or on edge for a beam direction parallel to the seating plane. See Application Bulletin 237 for handling instructions Ordering Information Applications: Total Beam Output Power Rise / Fall Slotted switches Part LED Peak I (mA) Angle Packaging F (W) Min Times (nS) Typ Number Wavelength Typ / Max (Degrees) Industrial environments OPR5200 890 nm 350 20 / 50 90 500 / 250 Chip Tray Space-limited applications Light Current V Input Power E Viewing Angle CE E Part Packaging 2 I (A) Min Max (W/cm ) (Degrees) C(ON) Number Sensor OPR5500 Transistor 36 30 150 120 Chip Tray OPR5200 OPR5500 Pin LED Pin Transistor 1 Anode 1 Collector 2 Emitter 2 Cathode 3 Base 3 N.C. 1 1 Collector Base NPN Warning: Front 3 3 MILLIMETERS Trans. DIMENSIONS ARE IN: Window is pressure TOLERANCE IS .005 0.13 INCHES sensitive. Do not Emitter apply pressure or high vacuum to 2 2 window. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue B 03/2012 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 3 Miniature Surface Mount LEDOPR5200 PhototransistorOPR5500 OPR5200 Absolute Maximum Ratings (T = 25 C unless otherwise noted) A Storage and Operating Temperature -55 C to +125 C Continuous Forward Current 50 mA Peak Forward Current (1 s pulse width, 10% duty cycle) 1.0 A (1) Power Dissipation 100 mW (2) Solder reflow time within 5C of peak temperature is 20 to 40 seconds 250 C OPR5200 Electrical Characteristics (T = 25 C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS P Output Power 350 - - W I = 20 mA O F V Forward Voltage - - 1.8 V I = 20 mA F F I Reverse Current - - 100 A V = 2 V R R Peak Wavelength - 890 - nm I = 20 mA P F Spectral Bandwidth - 80 - nm I = 20 mA BW F Emission Angle - 45 - - at half power points HP t Output Rise Time - 500 - ns r I = 100 mA, PW = 10.0 s, D.C. = P 10% t Output Fall Time - 250 - ns f Notes: (1) Derate at 1.00 mW/ C above 25 C. (2) Solder time less than 5 seconds at temperature extreme. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 03/2012 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 3 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com