LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RHASeries RHA Realized higher voltage than RWF series (500 to 650Vdc) Endurance with ripple current : 5,000 hours at 85 Higher voltage Suitable for high voltage inverter RWF RoHS2 compliant SPECIFICATIONS Items Characteristics Category -25 to +85 Temperature Range Rated Voltage Range 500 to 650Vdc Capacitance Tolerance 20% (M) (at 20, 120Hz) Leakage Current I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 5 minutes) Dissipation Factor 0.25 max. (tan ) (at 20, 120Hz) Low Temperature Capacitance change C(-25 )/C(+20)0.6 (at 120Hz) Characteristics Insulation Resistance When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. Insulation When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp Withstanding Voltage on the insulating sleeve covering the case, there shall not be electrical damage. Endurance The following specications shall be satised when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85 . Capacitance change 20% of the initial value D.F. (tan ) 200% of the initial specied value Leakage current The initial specied value Shelf Life The following specications shall be satised when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specied value Leakage current The initial specied value DIMENSIONS (Screw-Mount) mm Mounting Clamp Code : C Terminal Code : LG Mounting Clamp Code : B 360 A1 3 W1 Sleeve (PVC : Black) 455 6 305 Vent 8 G1 L+4max. J Plastic disk D A B W F D E K M F J 50 78.0 64.0 68.0 22.4 50 32.5 37.0 4.5 22.4 14.0 50 &63.5 : G=6 63.5 90.0 76.0 80.0 28.0 4.5 28.0 14.0 63.5 38.1 43.5 76.2 &89 : G=5 76.2 104.5 90.0 93.5 31.5 76.2 44.5 50.0 4.5 31.5 14.0 100 : G=10 4.5 31.5 16.0 89 50.8 56.5 100 56.5 63.4 5.5 41.5 18.0 <Screw specications> to 89 Plus hexagon-headed screw :M50.810 100 Cross-recessed head (phillips) screw : M81.2516 Spring washer,Washer Maximum screw tightening torque :3.23Nm Maximum screw tightening torque :6.31Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RHA AAA LG N AAA M AAA U Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800 F:682, 12,000 F:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 500V:501, 650V:651) Series code Category Please refer toProduct code guide (screw-mount terminal type Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U F1 D+1.8max. 4.5 B1 K1 E1 MLARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RHASeries STANDARD RATINGS Rated ripple Rated ripple WV Cap Case size current WV Cap Case size current tan Part No. tan Part No. (Vdc) (F) D L(mm) (Arms/ (Vdc) (F) D L(mm) (Arms/ 85 ,120Hz) 85 ,120Hz) 1,200 50 95 0.25 5.90 ERHA501LGC122MC95U 5,600 89 150 0.25 18.2 ERHA551LGC562MFF0U 1,500 50 115 0.25 7.20 ERHA501LGC152MCB5U 6,800 89 170 0.25 21.1 ERHA551LGC682MFH0U 550 1,800 50 130 0.25 8.30 ERHA501LGC182MCD0U 8,200 100 170 0.25 24.8 ERHA551LGC822MGH0U 2,200 50 150 0.25 9.80 ERHA501LGC222MCF0U 10,000 100 200 0.25 29.4 ERHA551LGC103MGL0U 2,700 63.5 120 0.25 11.2 ERHA501LGC272MDC0U 1,200 63.5 95 0.25 6.70 ERHA601LGC122MD95U 3,300 63.5 140 0.25 13.3 ERHA501LGC332MDE0U 1,500 63.5 110 0.25 8.00 ERHA601LGC152MDB0U 3,900 63.5 170 0.25 15.7 ERHA501LGC392MDH0U 1,800 63.5 125 0.25 9.30 ERHA601LGC182MDC5U 3,900 76.2 130 0.25 15.4 ERHA501LGC392MED0U 1,800 76.2 95 0.25 9.10 ERHA601LGC182ME95U 500 4,700 76.2 150 0.25 18.1 ERHA501LGC472MEF0U 2,200 63.5 145 0.25 11.0 ERHA601LGC222MDE5U 5,600 76.2 170 0.25 20.8 ERHA501LGC562MEH0U 2,200 76.2 110 0.25 10.8 ERHA601LGC222MEB0U 5,600 89 130 0.25 17.1 ERHA501LGC562MFD0U 2,700 63.5 170 0.25 13.1 ERHA601LGC272MDH0U 600 6,800 89 150 0.25 20.0 ERHA501LGC682MFF0U 2,700 76.2 125 0.25 12.6 ERHA601LGC272MEC5U 8,200 89 190 0.25 24.4 ERHA501LGC822MFK0U 3,300 76.2 145 0.25 14.9 ERHA601LGC332MEE5U 10,000 89 210 0.25 28.2 ERHA501LGC103MFM0U 3,900 76.2 170 0.25 17.3 ERHA601LGC392MEH0U 12,000 100 210 0.25 32.9 ERHA501LGC123MGM0U 3,900 89 130 0.25 14.2 ERHA601LGC392MFD0U 15,000 100 250 0.25 39.8 ERHA501LGC153MGR0U 4,700 76.2 190 0.25 20.0 ERHA601LGC472MEK0U 1,000 50 95 0.25 5.40 ERHA551LGC102MC95U 4,700 89 150 0.25 16.6 ERHA601LGC472MFF0U 1,200 50 110 0.25 6.30 ERHA551LGC122MCB0U 5,600 89 170 0.25 19.1 ERHA601LGC562MFH0U 1,500 50 130 0.25 7.60 ERHA551LGC152MCD0U 1,000 63.5 100 0.25 6.30 ERHA651LGC102MDA0U 1,800 63.5 105 0.25 8.60 ERHA551LGC182MDA5U 1,200 63.5 110 0.25 7.20 ERHA651LGC122MDB0U 2,200 63.5 120 0.25 10.1 ERHA551LGC222MDC0U 1,500 63.5 130 0.25 8.60 ERHA651LGC152MDD0U 2,700 63.5 150 0.25 12.4 ERHA551LGC272MDF0U 1,800 63.5 150 0.25 10.1 ERHA651LGC182MDF0U 550 2,700 76.2 105 0.25 11.7 ERHA551LGC272MEA5U 650 2,200 63.5 170 0.25 11.7 ERHA651LGC222MDH0U 3,300 63.5 170 0.25 14.5 ERHA551LGC332MDH0U 2,700 76.2 150 0.25 13.6 ERHA651LGC272MEF0U 3,300 76.2 130 0.25 14.2 ERHA551LGC332MED0U 3,300 76.2 170 0.25 15.8 ERHA651LGC332MEH0U 3,900 76.2 140 0.25 15.9 ERHA551LGC392MEE0U 3,900 89 155 0.25 15.3 ERHA651LGC392MFF5U 4,700 76.2 170 0.25 19.1 ERHA551LGC472MEH0U 4,700 89 190 0.25 18.4 ERHA651LGC472MFK0U 4,700 89 130 0.25 15.6 ERHA551LGC472MFD0U RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) 50 120 300 1k 3k Coefcient 0.8 1.0 1.2 1.3 1.4 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RHA series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U