A. Fixed black glass-filled nylon cap with slotted opening to allow size adjustment. B. 300 Series Stainless Steel Backplate forms channel to hold up to 10 links of band allowing size adjustment. C. 10mm snap stud machined from 300 series stainless steel. Fits to 10mm spring loaded medical type socket. Durable, providing long life well beyond that of sheet metal snaps. D. Premium adjustable metal expansion wristband. Inside links are constructed of 300 Series Stainless Steel. Width of links is 16mm. E. 0.05mm polyphenylsulfone sheet is laminated to each link. Provides >5,000 volt RMS insulation per ASTM D149. Scratch resistant. F. Size is adjusted by sliding 1 to 10 links of the band into the backplate channel. G. 300 Series Stainless Steel clip for electrical contact between snap stud and backplate. H. Underwriters Laboratory listing 90P1C. Circumference adjusts from 195 to 245mm (229620) and 225 to 280mm (229605), fully expanded Designed to satisfy wrist strap requirements of EN 61340-5. Meets ESD S1.1 cuff resistance interior =100 kilohms (1 x 10E2 ohms) Meets ESD S1.1 cuff resistance exterior =10 megohms (1 x 10E7 ohms) Item Description 229620 Adjustable Metal Wristband, 10mm Stud 229605 Adjustable Metal Wristband, 10mm Stud, XL 229625 Service Engineers Wrist Strap (229620 + 230200) The term wrist strap describes the combination of the wrist band, which should fit around the wrist making good skin contact, and the wrist cord which bonds the wearer to an earth bonding point. The wrist band will normally be worn for several hours at a time so it needs to be comfortable while making good contact with the skin. It is a good idea to check the wrist strap every time it is applied. Constant on line monitors can be used so that any breaks will be immediately found. As a safety feature, the ground cord should release with a force of between 5 N and 25 N, preferably at the wrist band end. (EN 61340-5-2 paragraph 5.2.7 Wrist strap) Wrist straps shall be checked before use. Each check shall be made with the wrist band worn in contact with the wearer s skin and with the ground cord attached to the appropriate Made in America tester. (EN 61340 5 1 paragraph 9.6 Daily checks) Adjustable Metal Wristband, 10mm VERMASON Drawing Number UNIT C, 4TH DIMENSION, FOURTH AVENUE, LETCHWORTH, DATE: HERTS, SG6 2TD UK 229620 PHONE: +44 (0) 1462-672005, FAX: +44 (0) 1462-670440 December 2008 E-MAIL:Service Vermason.co.uk, INTERNET: Vermason.co.uk 2008 VERMASON LTD.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for AntiStatic Control Products category: Click to view products by Vermason manufacturer: Other Similar products are found below : 13505 13870 14404 20-053-0017 2229 2231 3039 37061 39792 42470 XON-ASB4X30 XON-ASB4X6 XON-ASB6X30 09813 09857 XON-ASB8X10 XON-ASB6X10 19695 09037 68101 68103 73741 13515 13869 13868 13485 13457 13245 13332 13205 13135 91070 8031 8523 13080 13215 157 ROLL BEIGE 1.0 VERAX1R-300R 17260 66051 12550 19863 09121 73831 13340 13338 04541 19696 16104 SPI-20686