VER-29530

Black Conductive Strip Yellow Colour Made in the United Kingdom Description: This Disposable Heel Grounder is ideal for flooring/footwear personnel grounding of visitors in ESD protected areas. The black conductive strip is bordered by bright yellow colour material providing excellent visibility, assisting in enforcing an ESD control programme. The conductive non-woven nylon strip is held to the heel of the shoe by pressure sensitive adhesive. To Attach: 1. Strip release paper from pressure sensitive adhesive. 2. Insert the non-adhesive end of the disposable heel grounder inside the shoe under the foot so that the black dot is in the center of the heel area, facing upwards. 3. Wrap the tape snugly around the outside of the shoe so that the adhesive area adheres to the underside of the heel of the shoe. Note: 4. Step firmly onto pressure-sensitive adhesive and tear off excess material at serration. Alternative grounding method is through the foot and footwear to ESD control flooring or mats. There are a 5. Check for proper ground connection with the Vermason Dual Independent Footwear and Wrist Strap wide variety of footwear grounding devices available. CLC/TR 61340-5-2 User guide clause 4.7.4 Footwear Tester or other tester. Heel and toe grounders should be worn on each foot. If worn improperly, heel and toe grounders become 6. One heel grounder should be used on each foot. ineffective. It is important that the conductive ribbon has good electrical contact with the person s body through direct contact with the person s skin or by connection through the person s socks. CLC/TR 61340-5-2 User guide Footwear clause 4.7.4.2.1 Heel and toe grounders Electrical Performance: Perform daily Compliance Verification using a Vermason Footwear Tester 4 5 The tab to cup resistance is 5 x 10 to 8 x 10 ohms per IEC 61340-5-1 Clause A.2. Item No. Description Length Disposable Heel Grounder Dispenser VER-29530 Disposable Heel Grounder, pack of 100 298mm Designed to be mounted on a wall. Printed with instructions for use of Caution: The heelgrounder is for ESD control. It will not reduce or increase your risk of receiving electric shock Disposable Heel Grounder. Treated when using or working on electrical equipment. with antistatic coating. Size: 315mm x 200mm x 55mm, tray is Material: Yellow non-woven fibrous material 105mm deep Conductor: Carbon black VER-27060 - Tray, wall mounted Width: 14mm 4 6 Electrical Resistance Rp-p (end-to-end): 5 x 10 to < 1 x 10 ohms Specifications and procedures subject to change without notice. Disposable Heel Grounder VERMASON DATE: Drawing Number UNIT C, 4TH DIMENSION, FOURTH AVENUE, LETCHWORTH, HERTS, SG6 2TD UK March PHONE: +44 (0) 1462-672005, FAX: +44 (0) 1462-670440 VER-29530 2016 E-MAIL: Service Vermason.co.uk, INTERNET: Vermason.co.uk 2016 VERMASON.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Vermason manufacturer: Other Similar products are found below : 072425B 229765 200535 222547 222562 50424 229625 242296 210320 210300 35268 220522 242140 47200 231250 203065 237670 231288 242210 242278 242291 239260 222635 237195 203005 241090 229100 242276 230310 J6609 242271 47201 242274 230480 238711 200520 35594 35595 230660 230500 237675 211045 231275 229775 237200 229755 203015 229630 230260 200515