18157 Vicor

VICOR CONFIDENTIAL REV. DESCRIPTION DATE APPROVED THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR 1 RELEASE PER E9830074 PEI 11/13/98 JMR HEREWITH IS NOT TO BE 2 REVISED PER E0030403 PEI 12/15/00 JMR REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN 3 REVISED PER E100944 KUK 07/22/10 DCS PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. 4 REVISED PER E120762 REJH 08/22/12 KUK .622 45 CHAMFER TO ROOT R.005 MAX OF THREAD (2 PLS) .403.002 .089 .188 .038 4-40 UNC-2A .045 .125.025 THREAD LOCK 4-40 UNC-2B SEE NOTE 4 0.312 MIN THREAD DEPTH 2 IMPERFECT THREADS ALLOWED NOTES: 1. MATERIAL: 300 SERIES STAINLESS STEEL PER AISI. 2. FINISH: CLEAR PASSIVATE PER QQ-P-35B, TYPE II. 3. REMOVE ALL BURRS AND SHARP EDGES. 4. MACHINE APPLY LOCTITE DRI-LOC 204 OR EQUIVALENT TO THREADS AS SHOWN. 5. KIT P/N 18157 6. BAG P/N 19133 7. DIMENSIONS ARE INCHES ONLY. DRAWN BY DATE SWD VICOR Lap Nguyen 11/24/1997 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE : INCH / MM STANDOFF, 0.403 LG MALE- TOLERANCES ARE: DECIMALS ANGLES FEMALE X.XX X.X = 0.01 0.25 1 X.XXX X.XX = 0.005 0.127 SIZE CAGE CODE DWG NO REV THIRD ANGLE PROJECTION A 67131 18121 4 SCALE 6:1 SHEET OF 1 1 DO NOT SCALE DRAWINGX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Standoffs & Spacers category: Click to view products by Vicor manufacturer: Other Similar products are found below : 588-6208-02 599-9844-02 M0516-3-N M0518-3-N M0521-3-N M0524-3-N M0532-35-N M0543-4-AL M0544-35-N M0544-3-N M0545- 3-AL M0553-3-N M0608-5-SS M0609-5-SS M0651-5-SS M0653-35-N M0654-4-SS M0655-5-AL M0658-35-AL M0660-4-AL M0660-4- N M0670-35-N M0671-5-N M0671-5-SS M0722-5-N M0725-6-N M0904-B-25-AL M1273-2545-AL M1273-2545-SS M1273-3005-AL M1273-3005-SS M1274-3005-AL 60187 60202-SP 60273 60335-SP 60348-SP 60419-SP 60425-SP 60473-SP 60475-SP 60477-SP 60489-SP 60491-SP 60585-SP 60762-SP 60763-SP 60872-SP M1303-3506-AL M1307-3506-AL