Model 162 www.vishay.com Vishay Spectrol 1 / (12.7 mm) Ten Turn Wirewound 2 Bushing Mount Precision Potentiometer FEATURES Large range of ohmic values: 100 to 100 k Smallest size available on the market Very easy and accurate adjustment Material categorization: for definitions of compliance QUICK REFERENCE DATA please see www.vishay.com/doc 99912 Sensor type ROTATIONAL, multi turn wirewound Output type Output by turrets Market appliance Professional 1 Dimensions / (12.7 mm) 2 ELECTRICAL SPECIFICATIONS PARAMETER Total Resistance STANDARD SPECIAL Standard Range 100 to 100 k 115 k Tolerance 5 % 1 % STANDARD BEST PRACTICAL Linearity (independent) 0.30 % 0.15 % Noise 100 ENR Electrical Angle 3600 +15 -0 Power Rating 2.0 W at 40 C ambient, derated to zero at 125 C Insulation Resistance 100 M minimum, 500 V DC Dielectric Strength 500 V , 60 Hz RMS Absolute Minimum Resistance Linearity x total resistance or 0.5 , whichever is greater Linearity x total applied voltage for total resistance above End Voltage 20 , 2.0 % of total applied voltage for 20 and below ORDERING INFORMATION 16 2 B 12 032 03 X X X X OHMIC VALUE OHMIC VALUE MODEL STYLE GANGS SPECIAL REQUEST o o GANGS N 1 GANGS N 2 162 1 470 = 47 470 = 47 xxxx B: bushing 222 = 2.200 222 = 2.200 S: servo 103 = 10 k 103 = 10 k For ohmic value For ohmic value range see electrical range see electrical specification specification PART NUMBER DESCRIPTION (for information only) 162- 1 1 103 203 xxxx OHMIC VALUE OHMIC VALUE MODEL STYLE GANGS SPECIAL o o GANGS N 1 GANGS N 2 B: 1 S: 2 Revision: 22-Nov-16 Document Number: 57043 1 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Model 162 www.vishay.com Vishay Spectrol DIMENSIONS in inches (millimeters) MODEL 162B/162-1... MTG. FACE + 0.000 0.015 0.031 0.015 - 0.0003 0.0935 0.125 1.000 0.687 (2.37) (3.18) (25.40) (17.45) + 0.000 0.015 0.281- 0.001 0.281 (7.14) (7.14) 0.040 (1.02) 3 1 CW 0.015 0.500 2 (12.70) 1 / - 32 UNEF-2A 4 SCREWDRIVER SLOT 3 TERMINALS EQUALLY 0.025 WIDE (0.64) x 0.037 DEEP (0.94) SPACED ON A 0.300 (7.62) 2 CW 1 3 SCHEMATIC TOLERANCES: UNLESS OTHERWISE NOTED. DECIMALS 0.005 ANGLES 2 MECHANICAL SPECIFICATIONS PARAMETER Mechanical Rotation 3600, +15 -0 Bearing Type: Sleeve Torque (Maximum) STARTING 0.8 oz. - in (57.60 g - cm) RUNNING 0.6 oz. - in (43.20 g - cm) Mechanical Runouts (maximums): Shaft (TIR) 0.003 (0.08 cm) Pilot Dia. (TIR) 0.003 (0.08 cm) Lateral (TIR) 0.005 (0.13 cm) Shaft End Play 0.010 (0.25 cm) Shaft Radial Play 0.003 (0.08 cm) Weight 0.3 oz. (8.50 g) maximum Stop Strength 20 oz. - in (static) (1.44 kg - cm) MATERIAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Molded, glass filled, thermoset Vibration 15 g thru 2000 Hz Housing and Lids plastic Shock 50 g Bushing Brass, nickel plated Salt Spray 48 h Shaft Stainless steel, non-passivated Rotational Life 500 000 shaft revolutions Terminals Brass, plated for solderability Temperature Range -55 C to +125 C Bushing Mount Hardware Note Lockwasher Internal Tooth: Steel, nickel plated Nothing stated herein shall be construed as a guarantee of Panel Nut: Brass, nickel plated quality or durability. MARKING Units shall be marked with Vishay Spectrol Unit name and model no, resistance and resistance Identification tolerance, linearity, terminal identification and date code Revision: 22-Nov-16 Document Number: 57043 2 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000