94SVPD476X0035F12 Vishay

94SVPD www.vishay.com Vishay OS-CON SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON 94SVPD series provides improved characteristics with up to 125 C temperature capability and 35 V maximum voltage rating in a SMD package Improved damp heat (steady state) 85 C x 85 % RH performance Suitable for use in smoothing circuits of vehicle-mounted equipment, industrial equipment, etc. (2) This product can support lead (Pb)-free reflow Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 QUICK REFERENCE DATA DESCRIPTION CONDITIONS VALUE Operating temperature range - - 55 C to + 125 C Capacitance tolerance 120 Hz M: 20 % Tangent of loss angle (tan ) 120 Hz values in Electrical Data and Ordering Information table (1) Leakage current (A/2 min) (or less) After 2 min values in Electrical Data and Ordering Information table ESR - values in Electrical Data and Ordering Information table - 55 C Z/Z 0.75 to 1.25 Characteristics of impedance ratio 20 C 100 kHz, + 20 C at high and low temperature + 125 C Z/Z 0.75 to 1.0 20 C C/C Within 20 % tan 2 x or < than an initial standard + 125 C, 2000 h Endurance rated voltage applied ESR 2 x or < than an initial standard Leakage current Below an initial standard C/C Within 20 % + 85 C, 85 % to 90 % RH, tan 2 x or < than an initial standard Damp heat (steady state) 1000 h ESR 2 x or < than an initial standard rated voltage applied Leakage current Below an initial standard C/C Within 10 % tan 1.3 x or < than an initial standard (VPS) (2) Solder heat resistance ESR 1.3 x or < than an initial standard (230 C x 75 s) Below an initial standard Leakage current (after voltage procesing) Notes (1) If any doubt arises, measure the current after applying voltage (voltage treatment). Voltage treatment: The rated voltage is applied (10 V to 35 V) for 120 min at 125 C. (2) Refer to Recommended Reflow Profile for maximum temperatures. DIMENSIONS in millimeters 0.2 max. W Polarity marking (Cathode) Case No. Series 003 C6 size is PD SVPD E7, F8, E12, F12 47 Rated capacitance 35 size is SVPD Rated voltage L (+) R SIZE CODE D 0.5 L + 0.1/- 0.4 W 0.2 H 0.2 C 0.2 R P 0.2 C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 E7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 F8 10.0 7.9 10.3 10.3 11.0 0.6 to 0.8 4.6 E12 8.0 11.9 8.3 8.3 9.0 0.8 to 1.1 3.2 F12 10.0 12.6 10.3 10.3 11.0 0.8 to 1.1 4.6 Revision: 03-Aug-12 Document Number: 90022 1 For technical questions, contact: aluminumcaps4 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 D H P C 94SVPD www.vishay.com Vishay OS-CON CASE CODE LIST RATED VOLTAGE (SURGE AT 125 C) CAPACITANCE 10.0 16.0 25.0 35.0 (F) (11.5) (18.4) (29.0) (40.0) 8.2 E7 10 C6 18 F8 22 E7 E12 39 F8 47 E12 F12 56 C6 82 E7 F12 RECOMMENDED LAND PATTERN DIMENSIONS (in millimeters) SIZE CODE a b c C6 2.1 9.1 1.6 c E7 2.8 11.1 1.9 F8 4.3 13.1 1.9 a b E12 2.8 11.1 1.9 F12 4.3 13.1 1.9 FREQUENCY COEFFICIENT FOR RIPPLE CURRENT FREQUENCY 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz COEFFICIENT 0.05 0.3 0.7 1 ELECTRICAL DATA AND ORDERING INFORMATION RATED RIPPLE ALLOWABLE MAX. ESR MAX. MAX. CURRENT RIPPLE CURRENT (100 kHz U C CASE TANGENT LEAKAGE R R (3) (1) TO 100 kHz (mA) PART NUMBER (V) (F) CODE OF LOSS CURRENT 300 kHz) (2) 105 C < ANGLE (A) Tx 105 C (m ) Tx 125 C 10 56 C6 45 538 1700 0.12 112 94SVPD566X0010C6 16 82 E7 40 670 2120 0.12 262 94SVPD826X0016E7 10 C6 65 474 1500 0.10 50 94SVPD106X0025C6 22 E7 48 580 1835 0.10 110 94SVPD226X0025E7 25 39 F8 45 664 2100 0.10 195 94SVPD396X0025F8 47 E12 30 943 2980 0.12 235 94SVPD476X0025E12 82 F12 28 1202 3800 0.12 410 94SVPD826X0025F12 8.2 E7 70 400 1300 0.10 57 94SVPD825X0035E7 18 F8 60 550 1800 0.10 126 94SVPD186X0035F8 35 22 E12 50 700 2300 0.12 154 94SVPD226X0035E12 47 F12 30 1150 3650 0.12 329 94SVPD476X0035F12 Notes (1) Capacitance tolerance: M 20 % (2) After 2 min (3) Tx: Ambient temperature Revision: 03-Aug-12 Document Number: 90022 2 For technical questions, contact: aluminumcaps4 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000