CCF60866RFKE36 Vishay

CCF60 www.vishay.com Vishay Dale Metal Film Resistors, Industrial, 1 % Tolerance FEATURES Power ratings: 1/2 W, 3/4 W and 1 W at + 70 C 100 ppm/C temperature coefficient Superior electrical performance Flame retardant epoxy conformal coating Standard 5 band color code marking for ease of identification after mounting Tape and reel packaging for automatic insertion (52.4 mm inside tape spacing per EIA-296-E) Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING MAXIMUM TEMPERATURE RESISTANCE GLOBAL HISTORICAL TOLERANCE (1) P WORKING VOLTAGE COEFFICIENT RANGE E-SERIES 70 C MODEL MODEL % W V ppm/C CCF60 CCF-60 1.0 500 100 1 10 to 1M 96 Note Continuous working voltage shall be P x R or maximum working voltage, whichever is less. TECHNICAL SPECIFICATIONS PARAMETER UNIT CCF60 Rated Dissipation at 70 C W 1.0 Maximum Working Voltage V 500 Insulation Voltage (1 Min) V 500 eff Dielectric Strength V 450 AC 11 Insulation Resistance 10 Operating Temperature Range C - 65 to + 165 Terminal Strength (Pull Test) Ib 2 Weight g 0.75 max. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CCF60301RFKR36 (preferred part numbering format) C CF06 30K1RF R36 GLOBAL RESISTANCE TOLERANCE TEMPERATURE PACKAGING MODEL VALUE CODE COEFFICIENT CCF60 R = F = 1 % K = 100 ppm E36 = Lead (Pb)-free, K = k T/R (2500 pieces) M = M R36 = Tin/lead, 10R0 = 10 T/R (2500 pieces) 680K = 680 k 1M00 = 1.0 M Historical Part Number example: CCF-603010F R36 (will continue to be accepted) CCF-60 3010 F R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Note For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc 31544). Revision: 29-Oct-12 Document Number: 31068 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 CCF60 www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) A E D C B (Max.) GLOBAL C AB DE MODEL (Max.) 0.344 0.031 0.139 0.009 0.400 0.025 0.002 1.000 0.040 CCF60 (8.74 0.79) (3.53 0.23) (10.16) (0.64 0.05) (25.40 1.02) 120 120 100 100 80 80 60 60 40 40 20 20 0 0 - 65 - 50 25 0 25 50 70 75 100 125 150 165 175 200 0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 1.125 AMBIENT TEMPERATURE IN C APPLIED POWER IN W DERATING THERMAL RESISTANCE RESISTANCE VALUES MARKING Vishay Dale model CCF60 is available in the standard 96 Color code marking with 5 color bands resistance values per decade. Values are obtained from the following decade table by multiplying by powers of 10. As an example: 30.1 can represent 30.1 , 301 , 3.01 k, 30.1 k or 301 k. PERFORMANCE 10.0 14.7 21.5 31.6 46.4 68.1 10.2 15.0 22.1 32.4 47.5 69.8 MAXIMUM R POWER RATING AT + 70 C (TYPICAL TEST LOTS) 10.5 15.4 22.6 33.2 48.7 71.5 CCF60 1/2 W 3/4 W and 1 W 10.7 15.8 23.2 34.0 49.9 73.2 (1) TEST 11.0 16.2 23.7 34.8 51.1 75.0 Thermal Shock 0.5 % - 11.3 16.5 24.3 35.7 52.3 76.8 Short Time Overload 0.5 % - 11.5 16.9 24.9 36.5 53.6 78.7 Low Temperature Operation 0.5 % - 11.8 17.4 25.5 37.4 54.9 80.6 Moisture Resistance 1.5 % - 12.1 17.8 26.1 38.3 56.2 82.5 Resistance to Soldering Heat 0.5 % - 12.4 18.2 26.7 39.2 57.6 84.5 Shock 0.5 % - 12.7 18.7 27.4 40.2 59.0 86.6 Vibration 0.5 % - 13.0 19.1 28.0 41.2 60.4 88.7 Life 0.5 % 1.0 % 13.3 19.6 28.7 42.2 61.9 90.9 Terminal Strength 0.2 % - 13.7 20.0 29.4 43.2 63.4 93.1 Dielectric Withstanding 14.0 20.5 30.1 44.2 64.9 95.3 0.5 % - Voltage 14.3 21.0 30.9 45.3 66.5 97.6 Note (1) Test methods per MIL-STD-202 Revision: 29-Oct-12 Document Number: 31068 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RATED POWER IN % HEAT RISE (C ABOVE AMBIENT)