CMA02040X2202GB300

CMA 0204 www.vishay.com Vishay Beyschlag High Pulse Load Carbon Film MINI-MELF Resistors FEATURES Special carbon film technology Surge voltage capability up to 4 kV 1.2/50 s pulse ESD capability: 6 kV, human body model AEC-Q200 qualified Intrinsic sulfur resistance Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 CMA 0204 carbon film MELF resistors with advanced pulse APPLICATIONS load capability are the perfect choice for the protection of circuitry with signal or mains input lines from surge pulses. Automotive The resistors are also suitable for circuits exposed to high Telecommunication levels of electromagnetic interference or electrostatic Industrial discharge. The applications are in all fields of automotive, telecommunication, industrial, and medical equipment. Medical equipment TECHNICAL SPECIFICATIONS DESCRIPTION CMA 0204 DIN size 0204 Metric size code RC3715M Resistance range 10 to 100 k Resistance tolerance 2 % Temperature coefficient see TCR graph (1) Rated dissipation, P 0.4 W 70 Operating voltage, U AC /DC 200 V max. RMS (1) Permissible film temperature, 155 C F max. (1) Operating temperature range -55 C to 155 C Permissible voltage against ambient (insulation): 1 min U 300 V ins -9 Failure rate: FIT 0.1 x 10 /h observed Note (1) Please refer to APPLICATION INFORMATION below APPLICATION INFORMATION The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. At the maximum permissible film temperature of 155 C the useful lifetime is specified for 8000 h. The designer may estimate the performance of the particular resistor application or set certain load and temperature limits in order to maintain a desired stability. Revision: 27-Mar-17 Document Number: 28717 1 For technical questions, contact: melf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 CMA 0204 www.vishay.com Vishay Beyschlag MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION OPERATION MODE STANDARD POWER Rated dissipation, P CMA 0204 0.25 W 0.4 W 70 Operating temperature range -55 C to 125 C -55 C to 155 C Permissible film temperature, 125 C 155 C F max. CMA 0204 10 to 100 k 10 to 100 k Max. resistance change at P for resistance range, 70 1000 h 1 % 2 % R/R after: 8000 h 2 % 4 % TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES CMA 0204 see TCR graph 2 % 10 to 100 k E24 PACKAGING PACKAGING TYPE / SIZE CODE QUANTITY PACKAGING STYLE WIDTH PITCH DIMENSIONS B3 = BL 3000 180 mm / 7 Antistatic blister tape CMA 0204 8 mm 4 mm acc. IEC 60286-3 Type 2a B0 10 000 330 mm / 13 PART NUMBER AND PRODUCT DESCRIPTION Part Number: CMA02040X4701GB300 CM A 0 20 4 0 X 4 7 0 1 G B 3 0 0 TYPE / SIZE VERSION TCR RESISTANCE TOLERANCE PACKAGING CMA0204 0 = neutral X = no indication 3 digit value G = 2 % B3 1 digit multiplier B0 Multiplier -1 9 = *10 0 0 = *10 1 1 = *10 2 2 = *10 3 3 = *10 Product Description: CMA 0204 2 % BL 4K7 CMA 0204 2 % BL 4K7 TYPE SIZE TOLERANCE PACKAGING RESISTANCE CMA 0204 2 % BL 100R = 100 B0 4K7 = 4.7 k Note Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION Revision: 27-Mar-17 Document Number: 28717 2 For technical questions, contact: melf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000