IHDM1008BCEV8R2M30 Vishay

IHDM-1008BC-30 www.vishay.com Vishay Custom Magnetics High Current, Through-Hole Inductor Edge-Wound Series FEATURES High temperature operation, up to 180 C continuous with no aging Low DCR to minimize losses and reduce temperature rise Powdered iron alloy core technology provides stable inductance and saturation over operating temperature with satisfactory core losses Soft saturation gives predictable inductance decrease with increasing DC current independent of temperature Standard terminal is stripped and tinned for through hole mounting but other terminal configurations such as bare copper, SMD, and press fit pin are available upon request Hot dipped Sn plating provides low risk of whisker growth Custom options are available Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS High current and high temperature applications DC/DC converters High current motor and switching noise suppression Inverters STANDARD ELECTRICAL SPECIFICATIONS L INDUCTANCE DCR DCR HEAT RATING SATURATION SATURATION 0 SRF 20 % AT 100 kHz, AT 25 C AT 25 C CURRENT DC CURRENT DC CURRENT DC DIMENSION A DIMENSION B TYP. (1) (2) (3) 0.25 V, 0 A TYP. MAX. TYP. TYP. TYP. 0.016 0.4 0.020 0.5 (MHZ) (H) (m ) (m ) (A) (A) (A) 1.2 0.25 0.30 80 110 150 90 0.126 3.2 0.543 13.8 2.2 0.35 0.40 70 75 110 45 0.098 2.5 0.571 14.5 3.3 0.63 0.70 50 60 90 25 0.079 2.0 0.591 15.0 4.7 0.86 0.95 45 50 70 15 0.071 1.8 0.598 15.2 6.8 1.00 1.15 40 45 60 10 0.063 1.6 0.606 15.4 8.2 1.35 1.50 35 35 50 9 0.055 1.4 0.614 15.6 10 1.70 2.00 30 30 45 8 0.043 1.1 0.626 15.9 Notes All test data is referenced to 25 C ambient Operating temperature range -40 C to +180 C The part temperature (ambient + temp. rise) should not exceed 180 C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application Isolation voltage, coil to core: 350 V , 60 s, 5 mA max., DC (1) DC current (A) that will cause an approximate T of 40 C (2) DC current (A) that will cause L to drop approximately 20 % 0 (3) DC current (A) that will cause L to drop approximately 30 % 0 DIMENSIONS in inches (millimeters) (25.53 0.50) 1.005 0.020 A (20.73 0.75) (21.75 1.00) 0.816 0.030 B 0.856 0.039 (2.56 0.50) (6.00 1.00) (3.66 0.50) 0.101 0.020 0.236 0.039 0.144 0.020 (19.06 0.50) (4.00 0.40) 0.750 0.020 0.158 0.016 Revision: 12-Apr-2019 Document Number: 34522 1 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 IHDM-1008BC-30 www.vishay.com Vishay Custom Magnetics DESCRIPTION IHDM-1008BC-30 1.2 H 20 % EV e3 INDUCTANCE JEDEC LEAD (Pb)-FREE MODEL INDUCTANCE PACKAGE TOLERANCE STANDARD GLOBAL PART NUMBER I H D M 1 008 B C E V 1 R 2 M 3 0 MODEL SIZE LEAD STYLE INDUCTANCE TOL. SERIES (Pb)- FREE V: vertical VALUE PERFORMANCE GRAPHS 2.2 H 1.2 H 1.5 2.5 1.2 2.0 0.9 1.5 0.6 1.0 0.3 0.5 0.0 0.0 035 70 105 140 175 025 50 75 100 125 DC CURRENT (A) DC CURRENT (A) 3.3 H 4.7 H 5.0 3.0 4.0 2.3 3.0 1.5 2.0 0.8 1.0 0.0 0.0 025 50 75 100 125 0 20406080 100 DC CURRENT (A) DC CURRENT (A) Revision: 12-Apr-2019 Document Number: 34522 2 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 INDUCTANCE (H) INDUCTANCE (H) INDUCTANCE (H) INDUCTANCE (H)