K Series www.vishay.com Vishay BCcomponents Radial Leaded Multilayer Ceramic Capacitors for General Purpose Class 1, Class 2 and Class 3, 50 V , 100 V , 200 V , 500 V DC DC DC DC FEATURES High capacitance with small size High reliability Crimp and straight leadstyles Material categorization: for definitions of compliance please se e www.vishay.com/doc 99912 APPLICATIONS Temperature compensation Coupling and decoupling QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 3 Ceramic Dielectric C0G X7R Y5V Voltage (V ) 50 100 200 500 50 100 200 500 50 100 DC Min. Capacitance (pF) 10 10 33 33 100 100 100 100 10 000 10 000 Max. Capacitance (pF) 10 000 5600 3900 1800 1 000 000 560 000 220 000 47 000 1 000 000 220 000 Mounting Radial MARKING CAPACITANCE RANGE Marking indicates capacitance value and tolerance in 10 pF to 1 F accordance with EIA 198 and voltage marks. TOLERANCE ON CAPACITANCE OPERATING TEMPERATURE RANGE 5 %, 10 %, 20 %, + 80 %/- 20 % C0G, X7R: - 55 C to + 125 C RATED VOLTAGE Y5V: - 30 C to + 85 C 50 V , 100 V , 200 V , 500 V DC DC DC DC TEMPERATURE CHARACTERISTICS TEST VOLTAGE Class 1: C0G 50 V and 100 V : 250 % of rated voltage DC DC Class 2: X7R 200 V : 150 % of rated voltage + 100 V DC DC Class 3: Y5V 500 V : 130 % of rated voltage + 100 V DC DC SECTIONAL SPECIFICATIONS INSULATION RESISTANCE AT RATED VOLTAGE Climatic category (acc. to EN 60058-1) 50 V and 100 V : 100 G or 1000 F, whichever is less DC DC Class 1 and 2: 55/125/21 at rated voltage within 2 min of charging Class 3: 30/85/21 200 V , 500 V , and size 10: 10 G or 100 F, DC DC whichever is less at rated voltage within 2 min of charging APPROVALS EIA 198 DISSIPATION FACTOR IEC 60384-9 Class 1 0.1 % max. when C 30 pF (at 1 MHz 1 V where C 1000 pF, and a t DESIGN 1 kHz 1 V where C > 1000 pF) The capacitors consist of a general purpose MLCC For C < 30 pF: DF = 100/(400 + 20 x C) The lead wires are 0.5 mm and are made of 100 % tinned DF = dissipation factor in % copper clad steel wire C = capacitance value in pF The capacitors may be supplied with straight or kinked Class 2 2.5 % max. (at 1 kHz 1 V) leads having a lead spacing of 2.5 mm and 5.0 mm Class 3 5 % max. (at 1 kHz 1 V) Coating is made of yellow colored flame retardant epoxy resin in accordance with UL 94 V-0 Revision: 23-Apr-2021 Document Number: 45171 1 For technical questions, contact: cmll vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 K Series www.vishay.com Vishay BCcomponents LEAD CONFIGURATION AND DIMENSIONS (in millimeters) Wb Wb T Wb Wb H H H H SH SH SH SH L L L L 2.5 0.8 5.0 0.8 2.5 0.8 5.0 0.8 L2 H5 K2 K5 Component outline for Component outline for Component outline for Component outline for lead spacing 2.5 mm 0.8 mm lead spacing 5.0 mm 0.8 mm lead spacing 2.5 mm 0.8 mm lead spacing 5.0 mm 0.8 mm (straight leads) (flat bent lead s) (outside kink) (outside kink) MAXIMUM SEATING HEIGHT (SH) SIZE CODE Wb H T MAX. MAX. MAX. L2 H5 K2 K5 10 3.6 3.6 2.3 1.6 2.6 3.5 - 15 4.0 4.0 2.6 1.6 2.6 3.5 3.5 20 5.0 5.0 3.2 1.6 2.6 3.5 3.5 Notes Bulk packed types have a standard lead length L = 30 mm 5 mm The K5 lead style is not available for size 10 L2 and H5 are preferred styles MARKING SIZE 10 AND 15 CAPACITANCE VALUE < 100 pF SIZE 10 AND 15 CAPACITANCE VALUE 100 pF SIZE 20 Vishay logo or BC logo Vishay logo or BC logo Vishay logo or BC logo X X t X X X X X X t t: Tolerance code t: Tolerance code XX: Capacitance code XXX: Capacitance code XXX: Capacitance code Notes The capacitance code indicates actual capacitance in pF when capacitance value < 100 pF Two significant digits followed by one digit for the multiplier as given following: 1 = * 10, 2 = * 100, 3 = * 1000, 4 = * 10 000, 5 = * 100 000 The tolerance codes are J = 5 %, K = 10 %, M = 20 % and Z = + 80 %/- 20 % ORDERING CODE INFORMATION K 104 K 15 X7R F 5 3 H 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Product Capacitance Capacitance Size T.C. Rated Lead Packaging / Lead Lead Type (pF) Tolerance Code Code Voltage Diameter Lead Length Style Spacing K = radial The first two digits J = 5 % Please Please F = 50 V 5 = 0.50 mm 3 = bulk H = flat 2 = 2.5 mm DC leaded MLCC are the significant K = 10 % refer to refer to H = 100 V 0.05 mm T = tape crimp 5 = 5.0 mm DC figures of M = 20 % relevant relevant K = 200 V and reel L = DC capacitance and Z = + 80 %/ datasheet datasheet L = 500 V U = ammo straight DC the last digit is a - 20 % K = multiplier as outside follows: crimp 0 = * 1 1 = * 10 2 = * 100 3 = * 1000 4 = * 10 000 5 = * 100 000 Revision: 23-Apr-2021 Document Number: 45171 2 For technical questions, contact: cmll vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000