MDM (Military M83401/01 and /02) www.vishay.com Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP FEATURES Isolated, bussed and dual terminator schematics available MIL-PRF-83401 qualified Epoxy molded construction All device leads are hot-solder dipped Available in tube pack TCR available in K ( 100 ppm/C) or M ( 300 ppm/C) depending on style 100 % screen tested per group A, subgroup 1 of MIL-PRF-83401 All devices are capable of passing the MIL-STD-202, method 210, condition D, Resistance to Soldering Heat test STANDARD ELECTRICAL SPECIFICATIONS POWER POWER VISHAY TEMPERATURE MIL RATING RATING RESISTANCE (2) (1) DALE MIL TOLERANCE COEFFICIENT WEIGHT SPEC. SCHEMATIC ELEMENT PACKAGE RANGE MODEL/ STYLE % (-55 C to +125 C) g SHEET P P 70 C 70 C PIN NO. ppm/C W W 01 (B) 0.10 1.30 10 to 1M MDM14 RZ010 01 03 (A) 0.20 1.40 10 to 1M 1, 2, 5 100, 300 1.3 05 (J) 0.05 1.20 Consult factory 01 (B) 0.10 1.50 10 to 1M MDM16 RZ020 02 03 (A) 0.20 1.60 10 to 1M 1, 2, 5 100, 300 1.5 05 (J) 0.05 1.40 Consult factory Notes (1) K = 100 ppm/C M = 300 ppm/C (2) 2 % standard, 1 % and 5 % available GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M8340101M2201GBD04 (preferred part numbering format) M 8 3 4 0 1 0 1 M 2 2 0 1 G B D 0 4 RESISTANCE MIL STYLE SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING VALUE M83401 01 = 14 pin K = 100 ppm 3 digit significant F = 1 % A = Isolated D04 = Tin/lead, tube 02 = 16 pin M = 300 ppm figure, followed G = 2 % B = Bussed DSL = Tin/lead, tube, by a multiplier J = 5 % single lot date code 10R0 = 10 3302 = 33 k 1004 = 1 M Historical Part Number Example: M8340101M2201GB (will continue to be accepted) M83401 01 M 2201 G B D04 RESISTANCE MIL STYLE SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING VALUE New Global Part Numbering: M8340102KA001GJD04 (preferred part numbering format) M 8 3 4 0 1 0 2 K A 0 0 1 G J D 0 4 RESISTANCE MIL STYLE SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING VALUE M83401 01 = 14 pin K = 100 ppm Per Std. F = 1 % J = Dual D04 = Tin/lead, tube 02 = 16 pin M = 300 ppm MIL. Spec. G = 2 % terminator DSL = Tin/lead, tube, (see Impedance J = 5 % single lot date code Codes table) Historical Part Number Example: M8340102KA001GJ (will continue to be accepted) M83401 02 K A001 G J D04 RESISTANCE MIL STYLE SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING VALUE Note For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc 31542). Revision: 12-Sep-13 Document Number: 31516 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MDM (Military M83401/01 and /02) www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 0.310 0.010 (7.87 0.254) TYP 0.030 A 0.010 (0.254) (0.762) 0.250 0.005 (6.35 0.127) 0.120 0.005 (3.05 0.127) Pin 1 0.130 + 0.015 Identification - 0.005 0.010 + 0.005 (3.30 + 0.381 - 0.002 - 0.127) (0.254 + 0.127 - 0.051) Pin 1 0.075 0.015 0.018 0.003 (1.91 0.381) (0.457 0.076) 0.290 Min. 0.100 0.010 0.320 Nom. (2.54 0.254) Non-Accumulative Tol. 0.360 Max. C Spaces (7.37 Min. 8.13 Nom. B 0.010 (0.254) 0.050 0.005 (1.27 0.127) 9.14 Max.) VISHAY DALE MODEL A B C MDM14 0.750 (19.05) 0.600 (15.24) 6 MDM16 0.850 (21.59) 0.700 (17.78) 7 IMPEDANCE CODES CODE R ( ) R ()CODE R ( ) R () 1 2 1 2 A001 82 130 A010 330 470 A002 120 200 A011 330 680 A003 130 210 A012 1.5K 3.3K A004 160 260 A013 3K 6.2K A005 180 240 A014 180 270 A006 180 390 A015 270 270 A007 220 270 A016 560 560 A008 220 330 A017 560 1.2K A009 330 390 A018 620 2.7K TECHNICAL SPECIFICATIONS PARAMETER UNIT MDM SERIES Maximum Operating Voltage V 100 DC Voltage Coefficient of Resistance V < 50 ppm eff Dielectric Strength V 200 per min AC Insulation Resistance 10 000 M Operating Temperature Range C -55 to +125 Storage Temperature Range C -55 to +150 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Permanency testing per MIL-PRF-83401 Solderability Per MIL-PRF-83401 Body Molded epoxy Terminals Copper alloy, hot-solder dipped Revision: 12-Sep-13 Document Number: 31516 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000