MLV1210E3...3T www.vishay.com Vishay BCcomponents SMD 1210 Multilayer Varistor FEATURES Surface mount multilayer surge suppressor Inherent bidirectional clamping Excellent energy/volume ratio Suitable for reflow soldering Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Over-voltage and transient voltage protection: Data lines and I/O port protection Protection against ESD transients QUICK REFERENCE DATA On-board protection of ICs and transistors PARAMETER VALUE UNIT Modem protection Maximum Continuous Voltage DC 5.6 to 45.0 V LCD protection AC 4.0 to 35.0 Maximum Clamping Voltage DESCRIPTION 22.0 to 95.0 V at 2.5 A Size 1210 (M3225) multilayer chip varistor with NiSn Capacitance Range 650 to 5000 pF terminations. (at 1 kHz) Maximum Energy 0.4 to 2.2 J PACKAGING (10/1000 s) Available in 8 mm embossed tape and reel. Maximum Peak Current 250 to 400 A (8/20 s) Operating Temperature Range - 55 to 85 C Climatic Category 55/85/56 Weight 0.030 g ELECTRICAL DATA AND ORDERING INFORMATION BREAKDOWN CLAMPING PEAK MAXIMUM CAPACITANCE WORKING VOLTAGE VOLTAGE VOLTAGE CURRENT ENERGY PART NUMBER (1 kHZ) (1 mA) (2.5 A) (8/20 s) (10/1000 s) V V V V I E CSAP RMS DC b C p t V V V V A J pF MLV1210E3 4.0 5.6 7.0 to 10.0 22.0 250 0.4 5000 0403T 14.0 18.0 21.6 to 26.0 48.0 400 1.5 2000 1403T 20.0 26.0 31.0 to 38.0 62.0 400 1.9 1500 2003T 25.0 30.0 37.0 to 46.0 77.0 400 1.9 1200 2503T 35.0 45.0 50.4 to 61.6 95.0 250 2.2 950 3503T Notes Sinusoidal voltage assumed as normal operating condition. If a non-sinusoidal voltage is present, the crest voltage x 0.707 should be used for type selection. Voltage at a current of 1 mA, measured according to 4.5 of IEC 61051-1. Parts are not recommended for automotive applications. Revision: 23-Aug-12 Document Number: 29127 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MLV1210E3...3T www.vishay.com Vishay BCcomponents DIIMENSIONS in millimeters L WT L and L 1 2 3 3.2 0.2 2.5 0.25 1.8 max. 0.71 max. T W L L L 2 4 3 L 1 RECOMMENDED FOOTPRINT in millimeters AB C C 2.7 1.2 3.9 A B V/I CHARACTERISTICS Max. leakage current Max. clamping voltage 1000 100 MLV1210E30403T 10 MLV1210E31403T MLV1210E32003T MLV1210E32503T MLV1210E33503T 1 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 CURRENT (A) Revision: 23-Aug-12 Document Number: 29127 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VOLTAGE (V)