MTBAUGDT www.vishay.com Vishay Custom Magnetics Micro Gate Drive Transformers FEATURES Available Deliver MOSFET / IGBT gate power and timing signals simultaneously Directly drive high side MOSFETs / IGBTs on busses up to 200 V Excellent rise time, overshoot, and peak current characteristics For lead (Pb)-free parts, please add -LF to the end of the part number Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note ABSOLUTE MAXIMUM RATINGS * This datasheet provides information about parts that are PARAMETER CONDITIONS LIMITS UNITS RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Drive to gate, 1500 V DC Dielectric Please see the information / tables in this datasheet for details 1 min withstand Gate to gate, voltage 500 V DC 1 min Winding Any winding 100 mA RMS current Total power 400 mW (1) dissipation Operating Continuous -55 to +130 C temperature Storage Continuous -55 to +155 C temperature Frequency 125 to 750 kHz Size 8.9 x 6.6 x 5.6 mm (L x W x H) Terminals Surface-mount Note (1) Derate at 5 mW/C above 25 C STANDARD ELECTRICAL SPECIFICATIONS DC INTERWINDING (3) RESISTANCE CAPACITANCE USEFUL DRIVE MAGNETIZING LEAKAGE TRANSFER DRIVE GATE FREQ. EXCITATION INDUCTANCE INDUCTANCE (1) PART NUMBER RATIO SCHEMATIC DRIVE GATES TO TO RANGE MAX. MIN. MAX. (2) ( 1 %) (3)(4) (5) MAX. MAX. GATE GATE (kHz) (V x s) (H) (nH) () () MAX. MAX. (pF) (pF) MTBAUGDT125050 125 to 500 1 : 0.5 : 0.5 63 330 500 2.0 0.7 60 30 A MTBAUGDT125075 125 to 500 1 : 0.75 : 0.75 66 360 500 2.0 2.0 60 30 A MTBAUGDT125100 125 to 500 1 : 1 : 1 63 330 500 2.0 2.0 160 160 A MTBAUGDT250101 250 to 750 1 : 1 25.8 350 1000 1.0 0.65 75 n/a B MTBAUGDT250102 250 to 750 1 : 1 : 1 22.4 264 300 1.5 1.5 95 95 A MTBAUGDT250251 250 to 750 2.5 : 1 30.6 473 1500 1.5 0.3 25 n/a B MTBAUGDT250252 250 to 750 2.5 : 1 : 1 23.8 300 900 1.8 0.3 27 27 A Notes (1) For lead (Pb)-free parts, please add -LF to the end of the part number (2) Drive: gate or drive : gate : gate (3) T = 25 C A (4) Small signal measurement across the drive winding with both gates open (5) Small signal measurement a across the drive winding with both gates shorted (6) Derate at 5 mW/C above 25 C Revision: 20-Aug-2021 Document Number: 34567 1 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000MTBAUGDT www.vishay.com Vishay Custom Magnetics DIMENSIONS in inches millimeters 0.260 6.604 max. 0.220 5.588 max. 0.005 0.127 0.350 8.890 max. 0.280 7.112 3 4 6 x 0.047 1.194 0.073 1.854 0.073 1.854 4 places 0.146 3.708 6 x 0.063 1.600 Recommended pad layout 1 6 0.024 0.610 6 places Bottom view pins up 2 3 1 4 5 Drive Gate 3 6 1 6 4 Schematic A Schematic B TAPE AND REEL SPECIFICATIONS H P T P P 1 0 W PARAMETER SYMBOL DIMENSIONS inches mm Tape width W 0.630 16.0 Component pitch P 0.315 8.0 Indexing pitch P 0.157 4.0 0 Index-to-component offset P 0.079 2.0 1 Pocket height H 0.213 5.4 Tape thickness T 0.012 0.3 Reel overall diameter OD 13.0 330 Reel axle diameter AD 0.5 13 Reel capacity Qty 1000/reel Revision: 20-Aug-2021 Document Number: 34567 2 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000