NTCALUG01A103F801

333 3 NTCALUG01A Series www.vishay.com Vishay BCcomponents NTC Thermistors, Standard Lug Sensors FEATURES Easy mounting using ring tongue terminal Rugged construction Available Cable of PTFE insulation according to (1) NEMA HP-3, type E, rated 600 V , cable RMS test voltage 3.4 kV AEC-Q200 qualified (grade 1) cULus recognized, file E148885 (UL category XGPU2/XGPU8) LINKS TO ADDITIONAL RESOURCES Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 3D Models Design Tools Models Related Documents Note (1) Formerly MIL-W-16878/4, type E QUICK REFERENCE DATA PARAMETER VALUE UNIT APPLICATIONS (1) Resistance value at 25 C 4.7K to 100K Suitable for surface sensing applications, especially when a (1) Tolerance on R -value 1 to 5 % 25 good electrical insulation and a good thermal contact with (1) B -value 3435 to 4190 K 25/85 the chassis is required. Tolerance on B -value 0.5 to 1.5 % 25/85 Operating temperature range at: DESCRIPTION C Zero dissipation -40 to +150 A NTC thermistor chip is soldered to AWG 24 stranded (2) Dissipation factor 23 mW/K copper leads with PTFE insulation and insulated with epoxy (2) Thermal time constant 7.5 s coating. The insulated sensor is attached to a tin plated Min. dielectric withstanding copper ring lug. The lead wires are twisted and tinned. 1500 V AC voltage between terminals and lug Min. insulation resistance between 100 M PACKAGING terminals and lug at 500 V DC The thermistors are packed in cardboard boxes the Climatic category 40 / 150 / 56 (LCT / UCT / days) smallest packaging quantity is 500 units. Weight 1.5 to 2.3 g CAUTIONS AND WARNINGS ON MOUNTING Notes (1) Other R -values, B -values, and tolerances are available AND HANDLING 25 25/85 upon request Please read the special instructions: (2) Measured with screw mounted on an aluminum heatsink of 2 see www.vishay.com/doc 29221. 100 cm , thickness 1.5 mm, in still air at T = +25 C amb By means of M3 (stud 3, 4) or M3,5 (stud 5, 6) screw. Leads to be soldered or crimped AGENCY APPROVALS The device is suitable for screwing e.g. on metal surface cUL certificate XGPU8.E148885 The leads are suitable for soldering e.g. on PCB ULus certificate XGPU2.E148885 Note Agency approval documents, please see: www.vishay.com/ppg 29092&documents DESIGN-IN SUPPORT Other resistance curves and tolerances are available on request Consult Vishay for other lead length, other connector crimping, or other features 3D solid models: www.vishay.com/doc 29144 NTC curve computation: www.vishay.com/thermistors/ntc-rt-calculator/ Revision: 16-Aug-2021 Document Number: 29092 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D NTCALUG01A Series www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters T D 2 D D 3 4 D 1 L 2 E L L 1 3 L L D D D TL ED 1 2 1 2 3 3 4 Refer to the 3.8 1 3.7 + 0.2 / - 0 7.2 0.2 5.6 + 0.3 / - 0.2 1.0 15.70 0.3 6.2 0.2 1.12 0.1 ordering table ELECTRICAL DATA AND ORDERING INFORMATION UL SAP MATERIAL AND ORDERING NUMBER R - B - 25/85 25 B L RECOG. R 25/85 1 25 TOL. TOL. DESCRIPTION RoHS-COMPLIANT () (K) (mm) RoHS-COMPLIANT ( %) (1) ( %) WITH EXEMPTION 38.1 NTC Lug01 4.7K 3 % 3984K 4700 3 3984 0.5 NTCALUG01A472H NTCALUG01A472HA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 10K 1 % 3435K 10 000 1 3435 1 NTCALUG01A103FL NTCALUG01A103FLA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 10K 1 % 3984K 10 000 1 3984 0.5 NTCALUG01A103F NTCALUG01A103FA 3.8 PTFE AWG 24 38 mm 80 NTC Lug01 10K 1 % 3984K 10 000 1 3984 0.5 NTCALUG01A103F800 NTCALUG01A103F800A 5 PTFE AWG 24 80 mm 80 NTC Lug01 10K 1 % 3435K 10 000 1 3435 1 NTCALUG01A103F800L NTCALUG01A103F804A 5 PTFE AWG 24 80 mm 160 NTC Lug01 10K 1 % 3984K 10 000 1 3984 0.5 NTCALUG01A103F161 NTCALUG01A103F161A + 10 / - 5 PTFE AWG 24 160 mm 160 NTC Lug01 10K 1 % 3435K 10 000 1 3435 1 NTCALUG01A103F161L NTCALUG01A103F165A + 10 / - 5 PTFE AWG 24 160 mm 38.1 NTC Lug01 10K 2 % 3984K 10 000 2 3984 0.5 NTCALUG01A103G NTCALUG01A103GA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 10K 3 % 3984K 10 000 3 3984 0.5 NTCALUG01A103H NTCALUG01A103HA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 10K 5 % 3984K (2) 10 000 5 3984 0.5 NTCALUG01A103J NTCALUG01A103JA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 47K 3 % 4090K 47 000 3 4090 1.5 NTCALUG01A473H NTCALUG01A473HA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 100K 1 % 4190K 100 000 1 4190 1.5 NTCALUG01A104F NTCALUG01A104FA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 100K 2 % 4190K 100 000 2 4190 1.5 NTCALUG01A104G NTCALUG01A104GA 3.8 PTFE AWG 24 38 mm Notes Preferred versions for new designs (1) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound (2) NTCALUG01A103J identical to NTCALUGE2C90169 = 2381 645 90169 Revision: 16-Aug-2021 Document Number: 29092 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000