NTCALUG02A502G Vishay

NTCALUG02A Series www.vishay.com Vishay BCcomponents NTC Thermistors, Low Thermal Gradient Lug Sensors FEATURES Low thermal gradient due to the use of nickel conductor and low profile closed ring tongue AEC-Q200 qualified (grade 1) UL recognized, file E148885 (UL category XGPU2) Mounting: assembly screw mounting click logo to get started DESIGN SUPPORT TOOLS Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Models Design Tools APPLICATIONS Available Available Thermistors used for accurate surface temperature sensing SPICE models available: www.vishay.com/doc 29177 and control in: NTC curve computation: Computer equipment www.vishay.com/thermistors/ntc-curve-list/ Power electronics, heat-sink temperature control Consumer appliances QUICK REFERENCE DATA Industrial equipment PARAMETER VALUE UNIT Automotive equipment (1) Resistance value at 25 C 4.7K to 100K (1) Tolerance on R -value 1 2 3 % 25 DESCRIPTION (1) B value 3435 to 4190 K 25/85 Vishay thermistor chip NTC with epoxy coating and middle Tolerance on B -value 0.5 1.0 1.5 % 25/85 buffer layer mounted in a tin plated copper ring lug with Operating temperature range at PEEK insulated leads AWG 30 ( 0.25 mm), -55 to +125 C zero power mono-stranded silver-plated nickel. Thermal time constant 5s MOUNTING Dissipation factor 10 mW/K The device is suitable for screwing e.g. on a metal surface (2) Thermal gradient < 0.05 K/K through means of an M3 or M3.5 screw Min. dielectric withstanding 1500 V AC The connections are suitable for soldering on a PCB or for voltage between terminals and lug connector insertion Climatic category 55 / 125 / 56 The sensor is not suitable for being in permanent contact (LCT / UCT / days) with water or liquids Weight 1.0 g Other applicable screw hole sizes are available, for Notes example M4 or American Stud 8 (1) Other R -values, B -values, and tolerances are available 25 25/85 AWG 28 or AWG 26 wires available on request upon request (2) Consult Vishay for other cable length, cable section, The thermal gradient is the difference per C between the true temperature of the surface to be sensed and the temperature screw sizes, insulation, connector crimping or other measured by the sensor features ELECTRICAL DATA AND ORDERING INFORMATION R R -TOL. B B -TOL. L SAP MATERIAL AND UL RECOGNIZED 25 25 25/85 25/85 1 ( ) ( %) (K) ( %) (mm) ORDERING NUMBER (Y / N) 4700 2 3984 0.5 45 3 NTCALUG02A472G N 4700 1 3984 0.5 45 3 NTCALUG02A472F N 5000 2 3984 0.5 45 3 NTCALUG02A502G Y (1) 10 000 2 3984 0.5 45 3 NTCALUG02A103G Y 10 000 1 3984 0.5 45 3 NTCALUG02A103F Y 10 000 1 3984 0.5 80 +5 / -3 NTCALUG02A103F800 Y 10 000 1 3984 0.5 160 +5 / -3 NTCALUG02A103F161 Y 10 000 1 3435 1.0 45 3 NTCALUG02A103FL Y 10 000 1 3435 1.0 80 +5 / -3 NTCALUG02A103F800L Y 10 000 1 3435 1.0 160 +5 / -3 NTCALUG02A103F161L Y 100 000 3 4190 1.5 45 3 NTCALUG02A104H N Note (1) Is also known under material number NTCALUGE4C90294 Revision: 17-Nov-17 Document Number: 29094 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 NTCALUG02A Series www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters T D2 D3 D4 D1 L2 E L1 L3 L L L D D D D ET 1 2 3 1 2 3 4 Refer to the ordering 6 1 16.8 0.3 3.7 +0.2 / -0 8.5 0.2 4.1 +0.4 / -0.1 0.56 0.1 4.8 0.2 0.8 table Revision: 17-Nov-17 Document Number: 29094 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000