NTCALUG85A103GLA Vishay

NTCALUG85A M6 Series www.vishay.com Vishay BCcomponents NTC Thermistors, Standard Lug Sensors FEATURES Easy mounting using ring tongue terminal Rugged construction Cable of PTFE insulation according to (1) NEMA HP-3, type E, rated 600 V RMS AEC-Q200 qualified (grade 1) UL recognized, file E148885 (UL category XGPU2) Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 click logo to get started DESIGN SUPPORT TOOLS Note (1) Formerly MIL-W-16878/4, type E, cable test voltage 3.4 kV Models Design Tools Available Available APPLICATIONS SPICE models available: www.vishay.com/doc 29178 Suitable for surface sensing applications, especially when a NTC curve computation: good electrical insulation and a good thermal contact with www.vishay.com/thermistors/ntc-curve-list/ the chassis is required. QUICK REFERENCE DATA DESCRIPTION PARAMETER VALUE UNIT A NTC thermistor chip is soldered to AWG 24 stranded (1) Resistance value at 25 C 10K silver plated copper leads with PTFE insulation and (1) insulated with epoxy coating. The insulated sensor is Tolerance on R -value 2 % 25 attached to a tin plated copper ring lug. The lead wires ar e (1) B -value 3435 to 3984 K 25/85 stripped. Tolerance on B -value 0.5 to 1 % 25/85 Operating temperature range at: PACKAGING C Zero dissipation -40 to +150 The thermistors are packed in cardboard boxes. (2) Dissipation factor 23 mW/K (2) MOUNTING Thermal time constant 7.5 s By means of M6 (Stud 1/4) screw. Leads to be soldered Min. dielectric withstanding 1500 V AC or crimped voltage between terminals and lug The device is suitable for screwing e.g. on metal surface Min. insulation resistance between 100 M terminals and lug at 500 V DC The leads are suitable for soldering e.g. on PCB Consult Vishay for other cable length, cable section , Climatic category 40 / 150 / 56 (LCT / UCT / days) screw sizes, insulation, connector crimping, or other features Weight 1.6 to 4.3 g Notes (1) Other R -values, B -values, and tolerances are available 25 25/85 upon request (2) Measured with screw mounted on an aluminum heatsink of 2 100 cm , thickness 1.5 mm, in still air at T = 25 C amb Revision: 19-Dec-2018 Document Number: 29195 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000NTCALUG85A M6 Series www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters T D 2 D D 4 3 D 1 L 2 E L L 1 3 L L D D D TL ED 1 2 1 2 3 3 4 Refer to the ordering 3.8 1 6.4 +0.4 / -0 13.2 0.3 5.6 +0.3 / -0.2 1.0 22.4 0.4 6.8 0.3 1.12 0.1 table ELECTRICAL DATA AND ORDERING INFORMATION SAP MATERIAL AND UL ORDERING NUMBER R R -TOL. B B -TOL. L 25 25 25/85 25/85 1 DESCRIPTION REC. ( ) ( %) (K) ( %) (mm) WITH RoHS WITHOUT RoHS (Y / N) (1) (1) EXEMPTION EXEMPTION NTC Lug85 M6 10K 10 000 2 3984 0.5 38.1 3.8 2 % 3984 K PTFE NTCALUG85A103G NTCALUG85A103GA Y AWG 24 38 mm NTC Lug85 M6 10K 10 000 2 3435 1 38.1 3.8 2 % 3435 K PTFE NTCALUG85A103GL NTCALUG85A103GLA Y AWG 24 38 mm NTC Lug85 M6 10K 10 000 2 3984 0.5 150 +10 / -5 2 % 3984 K PTFE NTCALUG85A103G151 NTCALUG85A103G151A Y AWG 24 150 mm Note (1) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound Revision: 19-Dec-2018 Document Number: 29195 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000