OLED-100H016A-RPP5N00000 www.vishay.com Vishay 100 x 16 Graphic OLED FEATURES Type: graphic Display format: 100 x 16 dots Built-in controller: OLED-0010 Duty cycle: 1/16 +5 V power supply Interface: 6800 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS ITEM STANDARD VALUE UNIT STANDARD VALUE ITEM SYMBOL UNIT Module dimension 80.0 x 36.0 x 10.0 (max.) MIN. MAX. Viewing area 66.0 x 16.0 Supply voltage V to V -0.3 5.3 V DD SS for logic Active area 59.95 x 11.15 mm Operating T -40 +80 Dot size 0.55 x 0.65 OP temperature C Dot pitch 0.60 x 0.70 Storage T -40 +80 STG temperature Mounting hole 75.0 x 25.2 ELECTRICAL CHARACTERISTICS STANDARD VALUE ITEM SYMBOL CONDITION UNIT MIN. TYP. MAX. Supply voltage for logic V to V - 4.8 5.0 5.3 DD SS Input high voltage V - 0.8 V -V IH DD DD Input low voltage V - GND - 0.2 V V IL DD Output high voltage V I = -0.5 mA 0.8 V -V OH OH DD DD Output low voltage V I = 0.5 mA GND - 0.2 V OL OL DD 50 % check board operating current I V = 5 V 283540 mA DD DD Note When you use 5 V for V , please do not use 3 V or 3.3 V for logic I/O, this will cause module does not work. DD OPTIONS EMITTING COLOR YELLOW GREEN RED BLUE WHITE -- Yes - - Revision: 07-Dec-16 Document Number: 37850 1 For technical questions, contact: displays vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 OLED-100H016A-RPP5N00000 www.vishay.com Vishay INTERFACE PIN FUNCTION PIN NO. SYMBOL FUNCTION 1V Ground (0 V) SS 2V Supply voltage for logic (5 V) DD 3 NC No connection 4 RS H / L, H: data L: instruction code 5 R / W H / L, H: read (module MPU) L: write (MPU module) 6E H, H L, chip enable signal 7 DB0 H / L, data bit 0 8 DB1 H / L, data bit 1 9 DB2 H / L, data bit 2 10 DB3 H / L, data bit 3 11 DB4 H / L, data bit 4 12 DB5 H / L, data bit 5 13 DB6 H / L, data bit 6 14 DB7 H / L, data bit 7 15 NC No connection 16 NC No connection DIMENSIONS in millimeters 80.0 0.5 4.95 71.2 66.0 (VA) 7.55 3.03 59.95 (AA) 10.0 max. 8.0 P2.54 x 15 = 38.1 4.8 1.8 16 x 1.0 PTH 1 16 100 x 16 dots 40.55 1.6 2.5 75.0 4 x 2.5 PTH 4 x 5.0 PAD 0.6 0.55 The non-specified tolerance of dimen sion is 0.3 mm. DOT SIZES SCALE 10/1 Revision: 07-Dec-16 Document Number: 37850 2 For technical questions, contact: displays vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 36.0 0.5 25.2 5.7 31.0 2.5 18.3 0.7 0.65 2 11.15 (AA) 16 (VA) 10.3