Not for New Designs PT-50 www.vishay.com Vishay Dale Through Hole Transformers Trigger, SCR Isolation FEATURES Designed for low-cost trigger source isolation in SCR power control circuits Small physical size and low profile provide packaging advantages Designed to transfer high amplitude or long duration pulses without saturation Industrial and commercial applications include motor speed controls, lighting controls and heater controls Interchangeable. Designed for circuit board mounting using same mounting dimensions as 11Z and PT-20 ELECTRICAL SPECIFICATIONS models Primary inductance values: from 200 H to 5000 H Material categorization: for definitions of compliance Turns ratio: 1:1, 2:1 and 5:1 please see www.vishay.com/doc 99912 Temperature range: -55 C to +105 C MATERIAL SPECIFICATIONS Dielectric test at 60 Hz: 1600 V (Windings to core) RMS Bobbin: glass-filled nylon AC line voltage at 60 Hz: 240 V maximum in test circuits RMS Terminals: 0.025 0.635 square tinned copper shown Material rating: +105 C class A STANDARD ELECTRICAL SPECIFICATIONS LEAKAGE PRIMARY INTERWINDING PRIMARY SECONDARY UNIPOLAR ET TURNS IND. MIN. IND. MAX. CAPACITY MAX. DCR MAX. DCR MAX. (V- s) (H) (pF) ( ) () MODEL RATIO ( H) PT-50-101 1:1 10 % 200 3 3 1.5 1.5 570 PT-50-102 1:1 10 % 500 6 6 4.5 4.5 912 PT-50-103 1:1 10 % 1000 12 12 8.0 8.0 1283 PT-50-104 1:1 10 % 2000 13 13 12.0 12.0 1853 PT-50-105 1:1 10 % 5000 15 15 18.4 18.4 2850 PT-50-106 2:1 10 % 500 6 6 4.0 2.0 912 PT-50-107 2:1 10 % 1000 10 10 10.0 2.0 1288 PT-50-108 2:1 10 % 2000 12 12 10.0 5.0 1881 PT-50-109 2:1 10 % 5000 15 15 18.0 10.0 2565 PT-50-110 5:1 10 % 5000 1500 1500 19.0 3.0 2850 DIMENSIONAL CONFIGURATIONS in inches millimeters 0.780 0.654 16.6 19.8 Max. Max. Schematic 2 4 Terminal Numbers 0.655 For Ref. Only 1 3 16.9 Max. PRI. SEC. 3 1 2 4 0.250 6.35 Min. Dot identifies 0.600 0.025 0.635 0.500 1 Terminal 15.24 Sq. Terminals Typ. 12.70 Revision: 16-Dec-09 Document Number: 34074 1 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000Not for New Designs PT-50 www.vishay.com Vishay Dale CIRCUIT DIAGRAM PART MARKING Load - Vishay Dale Line - Model - Dash number Transformer Coupled Breakdown Diode Triggering Circuit ORDERING INFORMATION PT-50 101 EB e2 MODEL DASH NUMBER PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER PT 0 5 0 E B 1 0 1 MODEL PACKAGE CODE DASH NUMBER Revision: 16-Dec-09 Document Number: 34074 2 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000