333 3 RCS e3 www.vishay.com Vishay Anti-Surge, High Power Thick Film Chip Resistors FEATURES Excellent surge pulse capability Superior ESD surge characteristics High power rating AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS LINKS TO ADDITIONAL RESOURCES Automotive Industrial 3D Models Telecommunications Medical The anti-surge thick film chip resistor series combines a significantly higher power rating and pulse load performance as compared to standard chip resistors. TECHNICAL SPECIFICATIONS DESCRIPTION RCS0402 e3 RCS0603 e3 RCS0805 e3 RCS1206 e3 Imperial size 0402 0603 0805 1206 Metric size code RR1005M RR1608M RR2012M RR3126M Resistance range 1 to 10 M jumper (0 ) Resistance tolerance 5 % 1 % 0.5 % Temperature coefficient 200 ppm/K 100 ppm/K (1) Rated dissipation, P 0.2 W 0.25 W 0.4 W 0.5 W 70 Operating voltage, U AC /DC 50 V 75 V 150 V 200 V max. RMS (1) Permissible film temperature, 155 C F max. Operating temperature range -55 C to +155 C Max. resistance change at P for 70 resistance range, R/R after: 1000 h 1.0 % 8000 h 2.0 % Permissible voltage against ambient (insulation): 1 min, U 75 V 100 V 200 V 300 V ins -9 Failure rate: FIT 0.1 x 10 /h observed Note (1) Please refer to APPLICATION INFORMATION below APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Revision: 01-Jun-2021 Document Number: 20065 1 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D RCS e3 www.vishay.com Vishay TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES 200 ppm/K 5 % 1 to 10 M E24 100 ppm/K 1 % 1 to 10 M E24 E96 RCS0402 e3 100 ppm/K 0.5 % 1 to 10 M E24 E96 Jumper, I = 3 A 20 m 0 - max. 200 ppm/K 5 % 1 to 10 M E24 100 ppm/K 1 % 1 to 10 M E24 E96 RCS0603 e3 100 ppm/K 0.5 % 1 to 10 M E24 E96 Jumper, I = 3.5 A 20 m 0 - max. 200 ppm/K 5 % 1 to 10 M E24 100 ppm/K 1 % 1 to 10 M E24 E96 RCS0805 e3 100 ppm/K 0.5 % 1 to 10 M E24 E96 Jumper, I = 4 A 20 m 0 - max. 200 ppm/K 5 % 1 to 10 M E24 100 ppm/K 1 % 1 to 10 M E24 E96 RCS1206 e3 100 ppm/K 0.5 % 1 to 10 M E24 E96 Jumper, I = 5 A 20 m 0 - max. Note The temperature coefficient of resistance (TCR) is not specified for 0 jumpers PACKAGING PACKAGING TYPE / SIZE CODE QUANTITY PACKAGING STYLE WIDTH PITCH DIMENSIONS ED = ET7 10 000 180 mm/7 RCS0402 e3 2 mm EE = EF4 50 000 330 mm/13 EI = ET2 5000 180 mm/7 ED = ET3 10 000 180 mm/7 2 mm EL = ET4 20 000 285 mm/11.25 RCS0603 e3 EE = ET8 50 000 330 mm/13 EA = ET1 5000 180 mm/7 Paper tape according to EB = ET5 10 000 8 mm 4 mm 285 mm/11.25 IEC 60286-3, Type 1a EC = ET6 20 000 330 mm/13 EA = ET1 5000 180 mm/7 RCS0805 e3 EB = ET5 10 000 4 mm 285 mm/11.25 EC = ET6 20 000 330 mm/13 EA = ET1 5000 180 mm/7 RCS1206 e3 EB = ET5 10 000 4 mm 285 mm/11.25 EC = ET6 20 000 330 mm/13 Revision: 01-Jun-2021 Document Number: 20065 2 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000