STE www.vishay.com Vishay SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors With Hermetic Seal FEATURES Vishay SuperTan Extended (STE) represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode system, also used in the ST, provides the highest capacitance per Available unit volume available. The STE combines the inherent reliability of wet tantalum with the capacitance stability of solid tantalum, and there are no circuit impedance restrictions. The range is exceptionally well suited for low voltage filtering and energy storag e applications. Ideal for designs targeting the military and aerospace industry. The SuperTan Extended (STE) is housed in an all tantalum, hermetically sealed case and is manufactured to withstand high stress and hazardous environments. Axial through-hole terminations: standard tin / lead (Sn / Pb), 100 % tin (RoHS-compliant) available Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C DC Leakage Current (DCL Max.): at +25 C and above: (to +125 C with voltage derating) leakage current shall not exceed the values listed in the Standard Ratings tables. Capacitance Tolerance: at 120 Hz, +25 C. 20 % standard. 10 % available as special. Life Test: capacitors are capable of withstanding a 2000 h life test at a temperature of +85 C at the applicable rated DC working voltage. ORDERING INFORMATION STE 6000 16 T4 M I E3 TYPE CAPACITANCE DC VOLTAGE RATING CASE SIZE CAPACITANCE INSULATING RoHS COMPLIANT F AT +85 C TOLERANCE SLEEVE M = 20 % I = insulated E3 = 100 % tin termination K = 10 % X = uninsulated (RoHS compliant) Blank = SnPb termination (standard design) Note Packaging: the use of formed plastic trays for packaging this type of axial lead component is standard. Tape and reel is not recommended due to the unit weight. Revision: 23-Mar-2021 Document Number: 43009 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 STE www.vishay.com Vishay DIMENSIONS in inches millimeters 0.0253 0.002 0.64 0.05 dia. Terminal Welded (no. 22 AWG) tinned nickel leads to Case 0.250 (6.35) solderable and weldable Max. 0.094 (2.38) Terminal Location Max. within 0.031 of Center D Dia. EEL 1 MAX. INSULATED L + 0.031 / - 0.016 + 0.79 / - 0.41 1 CASE CODE D 0.016 0.41 E 0.250 6.35 MAX. (DIA.) UNINSULATED T1 0.188 4.78 0.219 5.56 0.453 11.51 1.500 38.10 T2 0.281 7.14 0.312 7.92 0.641 16.28 2.250 57.15 T3 0.375 9.52 0.406 10.31 0.766 19.46 2.250 57.15 T4 0.375 9.52 0.406 10.31 1.062 26.97 2.250 57.15 Notes Material at egress is tantalum Approx. weight: T1: 2.3 g, T2: 5.7 g Insulation sleeving will lap over the ends of the capacitor case T3: 9.4 g, T4: 14.8 g STANDARD RATINGS MAX. MAX. CAPACITANCE TYP. MAX. DCL AT MAX. AC ESR CHANGE AT ESR AT IMP. AT RIPPLE CAPACITANCE CASE AT (1) VOLTAGE PART NUMBER +25 C -55 C 85 C +85 C / (F) CODE +25 C +25 C -55 C +85 C +125 C 1 kHz 120 Hz 40 kHz +125 C 120 Hz (A) (%) (%) (%) () () mA RMS (A) () 10 V AT +85 C 7 V AT +125 C DC DC 680 10 T1 Preliminary value, contact marketing 2000 10 T2 Preliminary value, contact marketing 4700 10 T3 STE4700-10T3MI 0.35 < 0.200 16 100 -80 10 20 3.50 4000 10 000 10 T4 STE10000-10T4MI 0.25 < 0.100 25 150 -85 20 35 3.00 5000 16 V AT +85 C 11 V AT +125 C DC DC 430 16 T1 Preliminary value, contact marketing 1200 16 T2 Preliminary value, contact marketing 3300 16 T3 STE3300-16T3MI 0.35 < 0.200 16 100 -80 10 15 3.50 4000 6000 16 T4 STE6000-16T4MI 0.30 < 0.150 25 150 -80 15 20 3.00 4500 25 V AT +85 C 15 V AT +125 C DC DC 270 25 T1 Preliminary value, contact marketing 1000 25 T2 Preliminary value, contact marketing 2200 25 T3 Preliminary value, contact marketing 4000 25 T4 STE4000-25T4MI 0.35 < 0.150 25 125 -80 15 20 5.00 4250 30 V AT +85 C 20 V AT +125 C DC DC 220 30 T1 Preliminary value, contact marketing 820 30 T2 STE820-30T2MI 1.00 < 0.600 3.5 18 -75 12 20 20.00 1650 1800 30 T3 Preliminary value, contact marketing 3300 30 T4 STE3300-30T4MI 0.35 < 0.200 25 125 -80 20 25 4.00 2750 35 V AT +85 C 22 V AT +125 C DC DC 180 35 T1 Preliminary value, contact marketing 680 35 T2 STE680-35T2MI 0.95 < 0.500 5 25 -75 16 20 16.00 2500 1500 35 T3 Preliminary value, contact marketing 2800 35 T4 STE2800-35T4MI 0.35 < 0.200 25 125 -80 20 30 4.50 4000 Notes (1) Part numbers shown are for units with 20 % capacitance tolerance and insulated capacitors. For units with 10 % capacitance tolerance change the letter M to K. For units without insulation, substitute X with I at the end of the part number. For RoHS-compliant add the E3 for suffix (2) Requires export license for shipments outside the US. Contact marketing for availability Revision: 23-Mar-2021 Document Number: 43009 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000