T16 www.vishay.com Vishay Wet Tantalum Capacitors, Extended Capacitance, Tantalum Case with Glass-to-Tantalum Hermetic Seal for -55 C to +125 C FEATURES Enhanced performance, high reliability design Terminations: axial, standard tin / lead (Sn / Pb), Available 100 % tin (RoHS-compliant) available Model T16 tantalum-case electrolytic Available capacitors provide all the advantages of Vishays SuperTan series devices, while offering improved reverse voltage and vibration capability Available Increased thermal shock capability of 300 cycles PERFORMANCE CHARACTERISTICS Designed for the avionics and aerospace applications Refer to: Typical Performance Characteristics Material categorization: for definitions of compliance Operating Temperature: -55 C to +85 C please see www.vishay.com/doc 99912 (to +125 C with voltage derating) Note Capacitance Tolerance: 10 %, 20 % standard * This datasheet provides information about parts that are DC Leakage Current (DCL Max.): at +25 C and above: RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. leakage current shall not exceed the values listed in th e Please see the information / tables in this datasheet for details Standard Ratings table. ORDERING INFORMATION T16 D 227 M 100 E Z S S MODEL CASE CAPACITANCE CAPACITANCE DC VOLTAGE RATING TERMINATION RELIABILITY / INSULATING ESR CODE TOLERANCE AT +85 C AND PACKAGING SHOCK / SLEEVE VIBRATION LEVEL See This is expressed K = 10 % This is expressed in E = tin / lead, bulk, Z = standard S = sleeved S = Ratings in picofarads. M = 20 % volts. To complete standard H = high U = unsleeved standard and The first two the three-digit block, C = 100 % tin, bulk Case digits are the zeros precede the Codes significant voltage rating. Table. figures. The third is the number of zeros to follow. Note Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the unit weight DIMENSIONS in inches millimeters D E L E 1 0.0253 0.002 0.64 0.05 dia. Weld (no. 22 AWG) tinned nickel leads Tantalum solderable and weldable L 2 CASE CODE L WEIGHT (g) 2 DL E 1 (max.) (max.) TYPE T16 ST 0.188 0.016 0.453 + 0.031 / - 0.016 1.500 0.250 AT1 0.734 18.64 2.6 4.78 0.41 11.51 + 0.79 / - 0.41 38.10 6.35 0.281 0.016 0.641 + 0.031 / - 0.016 2.250 0.250 BT2 0.922 23.42 6.2 7.14 0.41 16.28 + 0.79 / - 0.41 57.15 6.35 0.281 0.016 1.008 + 0.031 / - 0.016 2.250 EL2 1.171 29.75 7.84 7.14 0.41 25.60 + 0.79 / - 0.41 57.15 0.375 0.016 0.766 + 0.031 / - 0.016 2.250 0.250 CT3 1.047 26.59 11.6 9.52 0.41 19.46 + 0.79 / - 0.41 57.15 6.35 0.375 0.016 1.062 + 0.031 / - 0.016 2.250 0.250 DT4 1.343 34.11 17.7 9.52 0.41 26.97 + 0.79 / - 0.41 57.15 6.35 Note For insulated parts, add 0.015 0.38 mm to the diameter. The insulation shall lap over the ends of the capacitor body Revision: 21-Mar-2019 Document Number: 40139 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 T16 www.vishay.com Vishay STANDARD RATINGS MAX. DCL MAX. CAPACITANCE AC CAPACITANCE MAX. ESR MAX. IMP. (A) AT CHANGE (%) RIPPLE AT +25 C CASE AT +25 C AT -55 C PART NUMBER +85 C +85 C 120 Hz CODE 120 Hz 120 Hz 40 kHz +25 C AND -55 C +85 C +125 C (F) ( ) ( ) (mA ) RMS +125 C 25 V AT 85 C, 15 V AT 125 C DC DC 120 A T16A127(1)025(2)(3)(4)(5) 1.30 25 1 5 -42 8 12 1250 560 B T16B567(1)025(2)(3)(4)(5) 0.83 12 2 10 -65 14 18 2000 1200 C T16C128(1)025(2)(3)(4)(5) 0.65 7 5 20 -70 15 20 2400 1800 D T16D188(1)025(2)(3)(4)(5) 0.50 7 6 25 -72 15 20 3000 30 V AT 85 C, 20 V AT 125 C DC DC 100 A T16A107(1)030(2)(3)(4)(5) 1.30 25 1 5 -38 8 12 1200 470 B T16B477(1)030(2)(3)(4)(5) 0.85 15 2 10 -65 14 18 1800 1000 C T16C108(1)030(2)(3)(4)(5) 0.70 7 7 25 -70 15 25 2200 1500 D T16D158(1)030(2)(3)(4)(5) 0.60 6 12 35 -72 15 25 2900 50 V AT 85 C, 30 V AT 125 C DC DC 68 A T16A686(1)050(2)(3)(4)(5) 1.50 35 1 5 -25 8 15 1050 220 B T16B227(1)050(2)(3)(4)(5) 0.90 17.5 2 10 -50 8 15 1800 470 C T16C477(1)050(2)(3)(4)(5) 0.75 10 3 25 -45 8 15 2100 680 D T16D687(1)050(2)(3)(4)(5) 0.70 8 5 40 -58 10 20 2700 60 V AT 85 C, 40 V AT 125 C DC DC 47 A T16A476(1)060(2)(3)(4)(5) 2.00 44 1 5 -25 8 12 1050 150 B T16B157(1)060(2)(3)(4)(5) 1.10 20 2 10 -40 8 15 1800 390 C T16C397(1)060(2)(3)(4)(5) 0.90 15 3 25 -45 8 15 2100 560 D T16D567(1)060(2)(3)(4)(5) 0.80 10 5 40 -58 8 15 2700 75 V AT 85 C, 50 V AT 125 C DC DC 33 A T16A336(1)075(2)(3)(4)(5) 2.50 66 1 5 -25 5 9 1050 110 B T16B117(1)075(2)(3)(4)(5) 1.30 24 2 10 -35 6 10 1650 220 E T16E227(1)075(2)(3)(4)(5) 0.80 12 5 30 -30 6 15 2500 250 E T16E257(1)075(2)(3)(4)(5) 0.80 12 5 30 -30 6 15 2500 330 C T16C337(1)075(2)(3)(4)(5) 1.00 12 3 30 -45 6 10 2100 470 D T16D477(1)075(2)(3)(4)(5) 0.90 12 5 50 -50 6 10 2700 100 V AT 85 C, 65 V AT 125 C DC DC 15 A T16A156(1)100(2)(3)(4)(5) 3.50 125 1 5 -18 3 10 1050 68 B T16B686(1)100(2)(3)(4)(5) 2.10 37 2 10 -30 4 12 1650 150 C T16C157(1)100(2)(3)(4)(5) 1.60 22 3 25 -35 6 12 2100 220 D T16D227(1)100(2)(3)(4)(5) 1.20 15 5 50 -40 6 12 2700 125 V AT 85 C, 85 V AT 125 C DC DC 10 A T16A106(1)125(2)(3)(4)(5) 5.50 175 1 5 -15 3 10 1050 47 B T16B476(1)125(2)(3)(4)(5) 2.30 47 2 10 -25 5 12 1650 82 C T16C826(1)125(2)(3)(4)(5) 1.80 40 3 25 -35 5 12 1950 100 C T16C107(1)125(2)(3)(4)(5) 1.80 35 3 25 -35 5 12 2100 150 D T16D157(1)125(2)(3)(4)(5) 1.60 20 5 50 -35 6 12 2700 Note Part number definitions: (1) Capacitance tolerance: K, M (2) Termination / packaging: C = 100 % tin, bulk E = standard, tin / lead, bulk (3) Reliability level: Z = standard (non-ER / 500 g / 50 g / 53.79 g) H = high (non-ER / 500 g / 80 g / 53.79 g) (4) Insulating sleeve: S = sleeved U = unsleeved (5) ESR: S = standard Revision: 21-Mar-2019 Document Number: 40139 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000