End of Life - Last Available Purchase Date: 10-June-2019 T42 www.vishay.com Vishay Solid Tantalum Surface-Mount Capacitors TANTAMOUNT, Low ESR, Hi-Rel COTS, Built-in-Fuse, Leadframeless Molded FEATURES Individually fused multiple anode construction ensures fail-safe operation and graceful Available degradation in the event of failure High-reliability design with reliability Available screening available Surge current testing per MIL-PRF-55365 options available Available Ultra-low ESR Fuse characteristics: guaranteed fuse protection at 5 A, 10 ms Fuse characteristics are optimized to ensure activation to protect against catastrophic failures while avoiding false PERFORMANCE CHARACTERISTICS triggering Operating Temperature: -55 C to +125 C Terminations: wraparound Sn / Pb, standard. 100 % tin (above 85 C, voltage derating is required) available Capacitance: 10 F to 470 F Material categorization: for definitions of compliance Capacitance Tolerance: 10 %, 20 % please see www.vishay.com/doc 99912 Voltage Rating: 16 V to 75 V Note DC DC * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details ORDERING INFORMATION T42 M2 227 M 025 E S A TYPE CASE CAPACITANCE CAPACITANCE DC VOLTAGE TERMINATION / RELIABILITY SURGE CODE TOLERANCE RATING AT +85 C PACKAGING LEVEL CURRENT (available options are series dependent) See This is expressed in K = 10 % This is expressed E = Sn / Pb solder / S = 40 h A = 10 cycles Ratings picofarads. The first M = 20 % in volts. To 7 (178 mm) reel burn-in at +25 C and two digits are the complete the L = Sn / Pb solder / Z = non- B = 10 cycles Case significant figures. three-digit block, 7 (178 mm), 1/2 reel established at -55 C / Codes The third is the zeros precede the C = 100 % tin / reliability +85 C table number of zeros voltage rating. 7 (178 mm), reel to follow. A decimal point is H = 100 % tin / indicated by an R 7 (178 mm), 1/2 reel (6R3 = 6.3 V) U = 100 % tin / 7 (178 mm), partial reel (100 pcs/reel) R = Sn / Pb 7 (178 mm), partial reel (100 pcs/reel) Note We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limits after mounting. Revision: 15-Jan-2019 Document Number: 40165 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000End of Life - Last Available Purchase Date: 10-June-2019 T42 www.vishay.com Vishay DIMENSIONS in inches millimeters Anode polarity bar Anode termination Cathode termination W H P1 P2 P1 L CASE CODE L W H P1 P2 (REF.) 0.319 0.008 0.276 0.008 0.177 max. 0.055 0.019 0.208 M2 8.1 0.2 7.0 0.2 4.5 max. 1.4 0.5 5.3 RATINGS AND CASE CODES F 16 V 20 V 25 V 35 V 50 V 63 V 75 V (1) 10 M2 (1) 15 M2 (1) 22 M2 (1) 33 M2 (1) 47 M2 (1) 68 M2 (1) 100 M2 (1) 150 M2 220 M2 (1) 330 M2 (1) 470 M2 Note (1) Rating in development, contact factory for availability MARKING Polarity ++ + VISHAY T42 Family 2 220F-25V Vishay marking Revision: 15-Jan-2019 Document Number: 40165 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000