TCN www.vishay.com Vishay Techno Thick Film Capacitor Networks, Single-In-Line, Conformal Coated SIP FEATURES Isolated and bussed schematics available Available NP0 or X7R capacitors for line terminator Wide operating temperature range (- 55 C to 125 C) Epoxy based conformal coating Available Solder coated copper terminals Solderability per MIL-STD-202 method 208E Marking resistance to solvents per MIL-STD-202 method 215 Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS (2) CAPACITANCE RANGE CAPACITANCE TOLERANCE CAPACITANCE VOLTAGE MODEL SCHEMATIC (1) % V NP0 X7R DC 01 33 pF to 3900 pF 470 pF to 0.1 F 10, 20 50 TCN 02 33 pF to 3900 pF 470 pF to 0.1 F 10, 20 50 09 33 pF to 3900 pF 470 pF to 0.1 F 10, 20 50 Notes (1) NP0 capacitors may be substituted for X7R capacitors. (2) Tighter tolerances available on request. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TCN0801N101KTB (preferred part number format) T CN 0801 N 1 0 1K T B GLOBAL CAPACITANCE PIN COUNT SCHEMATIC CHARACTERISTICS TOLERANCE TERMINAL FINISH PACKAGING MODEL VALUE TCN 06 to 12 pin 01 N = NP0 (In picofarads) K = 10 % T = Sn90/Pb10 B = Bulk available 02 X = X7R 2 digit significant figure, M = 20 % C = Sn95.5/ 06 = 6 pin 09 followed by a multiplier Ag3.9/ 08 = 8 pin 101 = 100 pF Cu0.6 12 = 12 pin 392 = 3000 pF 104 = 0.1 F Historical Part Numbering: TCN0801101KS10 (will continue to be accepted) TCN 08 01 101 K S10 HISTORICAL CAPACITANCE PIN COUNT SCHEMATIC TOLERANCE TERMINAL FINISH MODEL VALUE Note For additional information on packaging, refer to the Through-hole Network Packaging document (www.vishay.com/doc 31542). Revision: 14-Jan-13 Document Number: 68003 1 For technical questions, contact: te1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000TCN www.vishay.com Vishay Techno SCHEMATICS Schematic 01 Schematic 02 Schematic 09 CC C CC C C C CC C C 1 2 3 4 n-1 n 1 2 3 4 n-1 n 1n2 3 4 n-1 Note Custom schematics available. DIMENSIONS in inches (millimeters) A Max. 0.130 (3.30) Max. C Pin 1 Identifier Max. 0.125 0.015 (Seating (3.18 0 .381) Plane) 0.020 0.002 (0.508 0.051) 0.100 0.005 0.010 0.002 (0.254 0.051) (2.54 0.127) Non-Cumulative B A B C NUMBER OF PINS (Max.) 0.005 (0.127) (Max.) 6 0.590 (14.99) 0.500 (12.70) 0.350 (8.89) 7 0.690 (17.53) 0.600 (15.24) 0.350 (8.89) 8 0.790 (20.07) 0.700 (17.78) 0.350 (8.89) 9 0.890 (22.61) 0.800 (20.32) 0.350 (8.89) 10 0.990 (25.15) 0.900 (22.86) 0.350 (8.89) 11 1.09 (27.69) 1.00 (25.40) 0.350 (8.89) 12 1.19 (30.23) 1.10 (27.94) 0.350 (8.89) Revision: 14-Jan-13 Document Number: 68003 2 For technical questions, contact: te1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000