TS63 www.vishay.com Vishay Sfernice Multi-Turn Surface Mount 1/4 Square Cermet Trimmers, Fully Sealed FEATURES 0.25 W at 70 C Industrial grade Multi-turn operation A low contact resistance variation (down to 2 % Rn) Low end contact resistance (1 typical) Full sealing Tests according to CECC 41000 or IEC 60393-1 The TS63 multiturn trimmer has been designed for use in Material categorization: for definitions of compliance PCB surface mounting applications. please see www.vishay.com/doc 99912 Three variations are available according to the positioning of the control screw and contact positions. The cermet track gives a high stability performance with an extended ohmic capacity of 10 to 2 M . DIMENSIONS in millimeters ( 0.5 mm) RECOMMENDED TS63X SOLDERING AREAS Slot 0.5 x 0.5 5.8 0.10 1 0.25 5 max. 1.8 2.54 1 0.10 c 0.7 c b b 2.54 6.85 max. 0.45 2.54 a 0.20 2.54 6.7 max. 6.85 max. 7.5 TS63Z 6.85 max. 3 1.8 Slot 0.5 x 0.5 5 max. b 1.3 0.1 9.3 1 0.1 7.6 max. 0.25 8.85 max. a c 6.85 max. 0.45 1 5.3 max. 2.54 2.54 2.54 2.54 TS63Y 2.54 5 max. 6.85 max. c Slot 0.5 x 0.5 c 0.3 b b 6.85 2.54 max. a a 2.54 1 1.8 3 2.54 1 0.10 6.7 max. 7.5 8 max. Revision: 22-Sep-15 Document Number: 51011 1 For technical questions, contact: sferpottrimmers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 1.3 0.1 0.45 6.85 max.TS63 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 14 turns 2 Resistance range 10 to 2 M Standard series 1 - 2 - 5 Standard 10 % Tolerance On request 5 % a c Circuit diagram (1) (3) cw b (2) Linear 0.25 W at 70 C 0.25 Power rating 0.125 0 0 50 70 100 155 AMBIENT TEMPERATURE IN C Temperature coefficient See Standard Resistance Element Data table Limiting element voltage 250 V Contact resistance variation (typical) 2 % Rn or 2 End resistance (typical) 1 Dielectric strength (RMS) 1000 V 6 Insulation resistance 10 M MECHANICAL SPECIFICATIONS Mechanical travel 15 turns 5 Operating torque (max. Ncm) 1.5 End stop torque Clutch action Unit weight (max. g) 0.5 Wiper (actual travel) Positioned at approx. 50 % ENVIRONMENTAL SPECIFICATIONS Temperature range -55 C to +155 C Climatic category 55/125/56 Sealed container Sealing IP67 MSL level 1 SOLDERING RECOMMENDATIONS Recommended reflow profile 2, see Application Note www.vishay.com/doc 52029 Revision: 22-Sep-15 Document Number: 51011 2 For technical questions, contact: sferpottrimmers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RATED POWER IN W