TS6 www.vishay.com Vishay Sfernice Multi-Turn Surface Mount 1/4 Square Cermet Trimmers, Fully Sealed FEATURES 0.25 W at 70 C Military and professional grade Multi-turn operation A low contact resistance variation (down to 2 % Rn) Low end contact resistance (1 typical) Full sealing Tests according to CECC 41000 or IEC 60393-1 Three variations are available according to the positioning of Material categorization: For definitions of compliance the control screw and contact positions. please see www.vishay.com/doc 99912 The TS6 multi-turn trimmer has been designed for use in PCB surface mounting applications. The cermet track gives a high stability performance with an extended ohmic capacity of 10 to 2 M . DIMENSIONS in millimeters ( 0.5 mm) RECOMMENDED TS6X SOLDERING AREAS Slot 0.5 x 0.5 5.8 0.10 5 max. 0.25 1 1.8 1 0.10 2.54 c 0.7 c b b 2.54 a 6.85 max. 2.54 2.54 3 7.5 6.7 max. 0.20 6.85 max. TS6Z 6.85 max. 1.8 3 Slot 0.5 x 0.5 5 max. 1.3 0.1 b 9.3 1 0.1 0.25 7.6 max. 6.85 max. 8.85 max. c a 0.45 1 5.3 max. 2.54 2.54 2.54 2.54 TS6Y 2.54 5 max. 6.85 max. c c 0.3 b b Slot 0.5 x 0.5 a 2.54 a 2.54 1 1.8 2.54 3 1 0.10 6.7 max. 7.5 8 max. Revision: 02-Aug-13 Document Number: 51010 1 For technical questions, contact: sferpottrimmers vishay.com, see also Application Note: www.vishay.com/doc 51001 and www.vishay.com/doc 52029 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 1.3 0.1 0.45 0.45 6.85 max. 6.85 max.TS6 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive Element Cermet Electrical Travel 14 turns 2 Resistance Range 10 to 2 M Standard Series E3 1 - 2.2 - 4.7 and on request 1 - 2 - 5 Standard 10 % Tolerance On Request 5 % Linear 0.25 W at 70 C 0.25 Power Rating 0.125 0 0 50 70 100 155 AMBIENT TEMPERATURE IN C a c Circuit Diagram (1) (3) b cw (2) Temperature Coefficient See Standard Resistance Element table Limiting Element Voltage (Linear Law) 250 V Contact Resistance Variation 2 % Rn or 2 End Resistance (Typical) 1 Dielectric Strength (RMS) 1000 V 6 Insulation Resistance 10 M MECHANICAL SPECIFICATIONS Mechanical Travel 15 turns 5 Operating Torque (max. Ncm) 1.5 End Stop Torque Clutch action Net wWeight (max. g) 0.5 Wiper (Actual Travel) Positioned at approx. 50 % ENVIRONMENTAL SPECIFICATIONS Temperature Range - 55 C to + 155 C Climatic Category 55/125/56 Sealing Fully sealed IP67 MSL Level 1 SOLDERING RECOMMENDATIONS Recommended reflow profile 2, see Application Note www.vishay.com/doc 52029 Revision: 02-Aug-13 Document Number: 51010 2 For technical questions, contact: sferpottrimmers vishay.com, see also Application Note: www.vishay.com/doc 51001 and www.vishay.com/doc 52029 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RATED POWER IN W