VCUT05E1-SD0HG4-08

VCUT05E1-SD0 www.vishay.com Vishay Semiconductors Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in Silicon Package FEATURES Ultra compact CLP0603 package Low package height < 0.3 mm 0.27 1-line ESD protection AEC-Q101 qualified available Working range 5.5 V 22543 Low leakage current < 0.1 A 0.6 0.3 22544 Low load capacitance C < 14 pF D ESD immunity acc. IEC 61000-4-2 30 kV contact discharge MARKING (example only) 30 kV air discharge Lead plating: Au (e4) Lead material: Ni 1 XY Topside coating 22454 e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) 1 = year code Material categorization: for definitions of compliance Open circle = month code and pin 1 please see www.vishay.com/doc 99912 XY = type code click logo to get started DESIGN SUPPORT TOOLS Models Available ORDERING INFORMATION ENVIRONMENTAL AND QUALITY CODE PACKAGING CODE PART NUMBER ORDERING CODE RoHS-COMPLIANT + 15K PER 7 REEL AEC-Q101 GOLD (EXAMPLE) (EXAMPLE) LEAD (Pb)-FREE TERMINATIONS (8 mm TAPE) QUALIFIED PLATED 15K/BOX = MOQ GREEN VCUT05E1-SD0 - G 4 -08 VCUT05E1-SD0-G4-08 VCUT05E1-SD0 H G 4 -08 VCUT05E1-SD0HG4-08 PACKAGE DATA DEVICE NAME PACKAGE NAME TYPE CODE WEIGHT SOLDERING CONDITIONS Peak temperature max. 260 C VCUT05E1-SD0 CLP0603-2L 5D 0.12 mg Reflow soldering according JEDEC STD-020 ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT 6A Peak pulse current acc. IEC 61000-4-5, 8/20 s/single shot I PPM Pin 1 to pin 2 Peak pulse power P 78 W PP = 8/20 s single shot acc. IEC 61000-4-5 t p Contact discharge acc. IEC 61000-4-2 10 pulses 30 ESD immunity V kV ESD Air discharge acc. IEC 61000-4-2 10 pulses 30 Operating temperature Junction temperature T -55 to +150 C J Storage temperature T -55 to +150 C stg Rev. 1.5, 03-Jan-2019 Document Number: 85900 1 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VCUT05E1-SD0 www.vishay.com Vishay Semiconductors CUT THE SPIKES WITH VCUT05E1-SD0 The VCUT05E1-SD0 is a Bidirectional and Symmetrical (BiSy) ESD protection device which clamps positive and negative overvoltage transients to ground. Connected between the signal or data line and the ground the VCUT05E1-SD0 offers a high isolation (low leakage current, low capacitance) within the specified working range. Due to the short leads and small packag e size of the tiny CLP0603 package the line inductance is very low, so that fast transients like and ESD strike can be clamped with minimal over- or undershoots. ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of lines which can be protected N - - 1 lines channel Reverse stand-off voltage Max. reverse working voltage V -- 5.5 V RWM Reverse voltage at I = 0.1 A V 5.5 - - V R R Reverse current at V = 5.5 V I -- 0.1 A RWM R Reverse breakdown voltage at I = 1 mA V 6.5 8 9 V R BR at I = 1 A V -8.8 10 V PP C Reverse clamping voltage at I = I = 6 A V -11 13 V PP PPM C at V = 0 V f = 1 MHz C -13 14 pF R D Capacitance at V = 2.5 V f = 1 MHz C -11- pF R D Transmission Line Pulse (TLP) t = 100 ns p Clamping voltage V -9.8 - V C-TLP I = 8 A TLP Transmission Line Pulse (TLP) t = 100 ns p Clamping voltage V -11- V C-TLP I = 16 A TLP Dynamic resistance Transmission Line Pulse (TLP) t = 100 ns R -0.15 - p DYN TYPICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb 120 % 100 % 8 s to 100 % Rise time = 0.7 ns to 1 ns 100 % 80 % 80 % 60 % 60 % 20 s to 50 % 53 % 40 % 40 % 27 % 20 % 20 % 0 % 0 % -10 0 10203040 50607080 90100 010 20 30 40 Time (ns) 20548 Time (s) 20557 Fig. 1 - ESD Discharge Current Wave Form Fig. 2 - 8/20 s Peak Pulse Current Wave Form acc. IEC 61000-4-2 (330 /150 pF) acc. IEC 61000-4-5 Rev. 1.5, 03-Jan-2019 Document Number: 85900 2 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Discharge Current I ESD I PPM