VJ OMD Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions for Boardflex Sensitive Applications FEATURES Open Mode Design (OMD) reduces risk of shorts or leakage in board flex applications Excellent reliability and thermal shock performance Efficient low-power consumption, ripple current capable to 1.2 A at 100 kHz RMS High voltage breakdown compared to standard design Available 100 % voltage conditioning available up to 630 V rating (process code 5H) DC Contact mlcc vishay.com for higher voltages Polymer termination available for intensive board flex requirements Wet build process Reliable Noble Metal Electrode (NME) system Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Demanding boardflex applications Input filter capacitors Output filter capacitors Snubber capacitors reduce MOSFET voltage spikes Filtering for switching power supplies For lighting and other AC applications please contact: mlcc vishay.com ELECTRICAL SPECIFICATIONS C0G (NP0) X7R GENERAL SPECIFICATION GENERAL SPECIFICATION Note Note Electrical characteristics at +25 C unless otherwise specified Electrical characteristics at +25 C unless otherwise specified Operating Temperature: -55 C to +125 C Operating Temperature: -55 C to +125 C Capacitance Range: 10 pF to 47 nF Capacitance Range: 100 pF to 1.8 F Voltage Range: 50 V to 3000 V Voltage Range: 16 V to 3000 V DC DC DC DC Temperature Coefficient of Capacitance (TCC): Temperature Coefficient of Capacitance (TCC): 0 ppm/C 30 ppm/C from -55 C to +125 C 15 % from -55 C to +125 C, with 0 V applied DC Dissipation Factor (DF): Dissipation Factor (DF): 0.1 % maximum at 1.0 V and < 50 V ratings 3.5 % maximum at 1.0 V and 1 kHz RMS RMS 1 MHz for values 1000 pF 50 V ratings 2.5 % maximum at 1.0 V and 1 kHz RMS 0.1 % maximum at 1.0 V and RMS Insulating Resistance: 1 kHz for values > 1000 pF at +25 C 100 000 M min. or 1000 F whichever is less Insulating Resistance: at +125 C 10 000 M min. or 100 F whichever is less at +25 C 100 000 M min. or 1000 F whichever is less Aging Rate: 1 % maximum per decade at +125 C 10 000 M min. or 100 F whichever is less Dielectric Strength Test: Aging Rate: 0 % maximum per decade performed per method 103 of EIA 198-2-E Dielectric Strength Test: Applied test voltages performed per method 103 of EIA 198-2-E 250 V -rated: 250 % of rated voltage DC Applied test voltages 500 V -rated: min. 150 % of rated voltage DC 200 V -rated: 250 % of rated voltage DC 630 V / 1000 V -rated: 150 % of rated voltag e DC DC 500 V -rated: 200 % of rated voltage DC 1500 V to 3000 V -rated: 120 % of rated voltage DC DC 630 V / 1000 V -rated: 150 % of rated voltage DC DC 1500 V to 3000 V -rated: 120 % of rated voltage DC DC Revision: 12-Apr-2019 Document Number: 45198 1 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ OMD Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 1206 1500 10 pF 4.7 nF 1210 2000 10 pF 8.2 nF 1808 3000 27 pF 8.2 nF C0G (NP0) 1812 3000 27 pF 18 nF 1825 1000 15 pF 33 nF 2220 1000 270 pF 39 nF 2225 1000 270 pF 47 nF 0805 630 470 pF 220 nF 1206 2000 270 pF 680 nF 1210 2000 390 pF 1.0 F 1808 3000 220 pF 18 nF X7R 1812 3000 100 pF 1.2 F 1825 2000 5.6 nF 1.5 F 2220 3000 1.0 nF 1.8 F 2225 2000 5.6 nF 1.8 F Note Detail ratings see Selection Chart ORDERING INFORMATION (2) VJ1210 Y 474 J X A A T CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC MARKING PACKAGING PROCESS (4) CODE NOMINAL TOLERANCE VOLTAGE CODE (1) CODE RATING 0805 A = C0G Expressed in F = 1 % X = Ni barrier J = 16 V A = 4X = 1206 (NP0) picofarads (pF). G = 2 % 100 % tin plated X = 25 V unmarked OMD cap 1210 Y = X7R The first two J = 5 % matte finish A = 50 V 5H = (3) 1808 digits are K = 10 % E = AgPd B = 100 V OMD cap C = 7 reel / paper tape 1812 significant, the M = 20 % B = polymer C = 200 V 100 % T = 7 reel / plastic tape 1825 third is a Note 100 % tin plated P = 250 V voltage P = 11 1/4 / 13 reel / (5) 2220 multiplier. An R C0G (NP0): matte finish E = 500 V conditioning paper tape 2225 indicates a F, G, J, K L = 630 V R = 11 1/4 / 13 reel / decimal point. X7R: G = 1000 V plastic tape Examples J, K, M R = 1500 V O = 7 reel / flamed 474 = 470 000 pF F = 2000 V paper tape H = 3000 V I = 11 1/4 / 13 reel / flamed paper tape Note I and O are used for E termination size 0805 Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance Consult for questions: mlcc vishay.com (2) Process code with 2 digits has to be added (3) Termination code E is for conductive epoxy assembly (4) Other termination options contact mlcc vishay.com for availability (5) Polymer termination, code B, only available in plastic tape T / R ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN X Ni barrier 100 % tin plated matte finish Yes Yes EAgPd Yes Yes B Polymer layer, 100 % tin plated matte finish Yes No Revision: 12-Apr-2019 Document Number: 45198 2 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000