VS-45EPS16L-M3, VS-45APS16L-M3 www.vishay.com Vishay Semiconductors High Voltage Input Rectifier Diode, 45 A FEATURES Very low forward voltage drop Glass passivated pellet chip junction 2 Designed and qualified according to 1 1 -JESD 47 JEDEC 2 AEC-Q101 qualified P/N available 3 3 (VS-45EPS16LHM3, VS-45APS16LHM3) TO-247AD 2L TO-247AD 3L Material categorization: for definitions of compliance Base cathode Base cathode please see www.vishay.com/doc 99912 2 2 APPLICATIONS Input rectification for single and three phase bridge configurations Off-board EV/HEV battery chargers (AEC-Q101 qualified 13 1 3 Cathode Anode Anode Anode part for on-board chargers also available) Renewable energy inverters VS-45EPS16L-M3 VS-45APS16L-M3 Input rectification for single and three phase bridge configurations PRIMARY CHARACTERISTICS Vishay Semiconductors switches and output rectifiers I 45 A F(AV) which are available in identical package outlines V 1600 V R DESCRIPTION V at I 1.16 V F F I 500 A FSM High voltage rectifiers optimized for very low forward voltage drop with moderate leakage. T max. 150 C J Package TO-247AD 2L, TO-247AD 3L These devices are intended for use in main rectification (single or three phase bridge) Circuit configuration Single MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS I Sinusoidal waveform 45 A F(AV) V 1600 V RRM I 500 A FSM V 45 A, T = 25 C 1.16 V F J T -40 to +150 C J VOLTAGE RATINGS V , MAXIMUM RSM V , MAXIMUM I RRM RRM NON-REPETITIVE PEAK REVERSE PART NUMBER PEAK REVERSE VOLTAGE AT 150 C VOLTAGE V mA V VS-45EPS16L-M3 1600 1700 1 VS-45APS16L-M3 1600 1700 ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUESUNITS Maximum average forward current I T = 109 C, 180 conduction half sine wave 45 F(AV) C 10 ms sine pulse, rated V applied 420 A Maximum peak one cycle RRM I FSM non-repetitive surge current 10 ms sine pulse, no voltage reapplied 500 10 ms sine pulse, rated V applied 884 RRM 2 2 2 Maximum I t for fusing I t A s 10 ms sine pulse, no voltage reapplied 1250 2 2 2 Maximum I t for fusing I t t = 0.1 ms to 10 ms, no voltage reapplied 12 500 A s Revision: 06-Jul-2018 Document Number: 96478 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VS-45EPS16L-M3, VS-45APS16L-M3 www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOLTEST CONDITIONS VALUES UNITS Maximum forward voltage drop V 45 A, T = 25 C 1.16 V FM J Forward slope resistance r 7.6 m t T = 150 C J Threshold voltage V 0.72 V F(TO) T = 25 C 0.1 J Maximum reverse leakage current I V = Rated V mA RM R RRM T = 150 C 1.0 J THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOLTEST CONDITIONSVALUES UNITS Maximum junction and storage temperature range T , T -40 to +150 C J Stg Maximum thermal resistance, junction to case R DC operation 0.40 thJC Maximum thermal resistance, junction to ambient R 40 C/W thJA Typical thermal resistance, case to heatsink R Mounting surface, smooth, and greased 0.25 thCS 6g Approximate weight 0.21 oz. minimum 6 (5) kgf cm Mounting torque (lbf in) maximum 12 (10) Case style TO-247AD 2L 45EPS16L Marking device Case style TO-247AD 3L 45APS16L 150 150 R (DC) = 0.40 C/W thJC R (DC) = 0.40 C/W thJC 140 140 130 130 Conduction angle 120 120 110 110 100 100 120 30 60 90 180 60 120 DC 90 Conduction 90 90 180 angle 30 80 80 0 1020304050607080 0 1020304050 Average On - State Current (A) Average On-State Current (A) Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics Revision: 06-Jul-2018 Document Number: 96478 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Max. Allowable Case Temperature (C) Max. Allowable Case Temperature (C)