Wachendorff Prozesstechnik GmbH & Co. KG Industriestrasse 7 D-65366 Geisenheim Tel.: +49 (0) 67 22 / 99 65 - 20 Fax: +49 (0) 67 22 / 99 65 - 78 www.wachendorff.de Graphical universal display UA964801 Resolution: Internal resolution with 65.535 steps (16 bit), Universal panel meter in 96 x 48 mm format Graphical LCD display programmable in 7 colours Relay outputs: 2 relay N.O. With seperated ground, 2 A at 250 VAC, Vertical or horizont mounting resistive. Programmable as N.O. or N.C.. Universal input for process signals, thermocouples, RTD and potentiometer Analogue output: 2 programmable analogue outputs (1x 0 VDC to 10 2 alarm outputs and two analogue outputs VDC and 1x 0/4 mA to 20 mA) with a resolution of 16 bits and an Serial communication via RS485 Modbus protocol accuracy of +/-0,2 % f.s.. Programmable for retransmission of the alarm 2 programmable user inputs value or process signal. No isolation among each other. Multilingual programming interface Communication: RS485 with Modbus RTU as slave. Supply: 24 VAC/DC to 230 VAC/DC +/-15 %, 50/60Hz, 6 VA Wiring: UA964801 The UA964801 is an indicator/panel meter for acquisition and retransmission of processes, also with fast transient. It is provided with relay outputs for alarm purpose, analogue outputs for retransmission of process/setpoints and programmable digital inputs. Available in standard format 96x48mm, the device can be configured both for horizontal and vertical mounting. Distinctive feature is the intuitive Protection class: IP54 from the front (with rubber sealing), back plane multilingual interface in 5 languages, supported by a graphic LCD IP20. display 128x64pixel with backlighting programmable for 7 colors. Housing: Black and robust plastic case,(PC) L94-V2, back plane ABS Display: Graphical 2,7 LCD display, 64 x 128 pixels. + PC Ul94 V-0. Backlight in 7 different colours (red, green, blue, orange, white, violett, azur) in positive or negative display. Dimensions: B 96 mm x H 48 mm x T 53 mm (without terminal blocks). Display range of process value: -32.767 to +32.767 DIN panel cut out: 91 mm x 45 mm. Display range of totalizer value: 0 to 4.000.000.000 (32 Bit) Programmable horizontal or vertical display incl. bargraph and trend. Connection: Via lockable and/or removable terminal blocks. Indicators: Three indicators for alarm status and serial Ambient conditions: Operating temperature: 0 C to +45 C relative communication. Programmable engineering unit (C, F, K, V, mA, humidity 35 % to 95 %. rF, non condensing. mBar, Bar, psi, mm, m, rpm, %rh, ph, g, Kg, q, t, m/s, l/h) Weight: 250 gramms Keypad: 4 push buttons for programming and setting up the threshholds. Scope of delivery: UA964801, mounting brackets, sealing, manual. Input range: Setting up of the input signal via software or keypad. Thermocouples type K, S, R, J, T, E, N cold junction: internal (from 0 C to 50 accuracy cold junction 0,1 C/C) RTD: Pt100, Pt500, Pt1000, Ni100, PTC1K, NTC10K Linear inputs: 0 V to 10 V, 0/4 mA to 20 mA, 0 mV to 60 mV and thermocouples type B with linearisation in 16 steps. Potentiometer: 1 kOhm to 6/160 kOhm. Accuracy: Tolerance at 25 C +/-0.2 % 1 digit for thermocouple input, RTD and analogue input signal. Measurement speed: Programmable up to 242 Hz. User input: Activation via PNP signal. Alternative selectable functions: Activation alarm output, tare, reset alarm/peakvalues/totalizer,sumfunction. Excitation: +24 VDC 35 mA Display examples Copyright by Wachendorff Prozesstechnik GmbH & Co. KG, Industriestrae 7, D-65366 Geisenheim, Tel.: 06722/9965-20, Fax: -78, Stand: 14.05.2013. All information without guarantee and subject to change.Wachendorff Prozesstechnik GmbH & Co. KG Industriestrasse 7 D-65366 Geisenheim Tel.: +49 (0) 67 22 / 99 65 - 20 Fax: +49 (0) 67 22 / 99 65 - 78 www.wachendorff.de Graphical universal display UA964801 Panel cut out 91,0x45mm Memory card (optional) with battery Dimensions (in mm) Programming: The panel meter will be programmed via push buttons or Windows-software. The programming menue is selectable in 5 different languages. The memory card is battery powered. With this technology you can programm the controller without powering it up (up to 1000 programm cycles with one battery). Order codes Type Order no.. Programming menue with selectable languages Graphical universal display UA964801 Accessories Programming module with USB cable SFUR0KIT Software download under: Http://www.wachendorff.de/wp/dpc dow epg sof.htmll Copyright by Wachendorff Prozesstechnik GmbH & Co. KG, Industriestrae 7, D-65366 Geisenheim, Tel.: 06722/9965-20, Fax: -78, Stand: 14.05.2013. All information without guarantee and subject to change. Recommended thickness 2to6mm