750-658 CAN Gateway 4 328 13 14 CAN-Status Internal data bus RUN CAN-Rx CAN-Tx Int. error CH CL Data contacts CAN-L CAN-H CAN-L CAN-H CAN-L CAN-H CG + Logic CAN-GND +24 V CAN-GND +24 V 24 V -- CAN-GND CAN-Rx CAN-Tx 0 V 24 V 0 V 0 V S S Shield CAN-Status (screen) 10 nF Internal data bus RUN Shield Shield Shield Int. error (screen) (screen) (screen) 750-658 750-658 1 M Power jumper contacts The CAN Gateway supports CAN Layer 2, while meeting CAN specifications Three operation modes are available: Sniffer mode provides a detailed CAN 2.0A (11-bit identifier) and 2.0B (29-bit identifier). Function blocks allow the bus analysis without interactions. In transparent mode, the gateway works as gateway to read and write higher-protocol telegrams (e.g., CANopen). an active CAN device that can send and receive any type of CAN telegrams. Mapped mode enables CAN telegrams to be generated directly from the The gateway adjusts itself to baud rates between 10 kbit/s to 1 Mbit/s via process image. It also allows select process values to be copied from received automatic bit-rate detection (Auto Baud Rate). It is also possible to set a fixed telegrams into the input process image. A CAN telegram may be sent cyclically, transmission rate. Six configurable filters for input telegrams allow CAN manually or event-triggered (change of process value). messages to be filtered via the CAN identifiers. Pack. Description Item No. Technical Data Unit CAN Gateway 750-658 1 Number of inputs 1 (CAN interface) Supported baud rates 10 kbit/s, 20 kbit/s, 50 kbit/s, 125 kbit/s, 250 kbit/s, 500 kbit/s, 800 kbit/s, 1 Mbit/s, Auto Baud Rate CAN data formats acc. to 2.0A (Standard: 11-bit ID), acc. to 2.0B (Extended: 29-bit ID) Operation modes Sniffer mode, transparent mode, mapped mode Internal bit width 8, 12, 16, 20, 24, 32, 40, 48 bytes configurable incl. control/status byte Isolation (peak value) V = 500V system/supply M Current consumption typ. (24 V) 12 mA Pack. Current consumption typ. (KBUS) 50 mA Accessories Item No. Unit Wire connection CAGE CLAMP Miniature WSB Quick marking system Cross sections 0.08 mm ... 2.5 mm / AWG 28 ... 14 plain 248-501 5 Strip lengths 8 ... 9 mm / 0.33 in with marking see Section 11 Width 12 mm Weight 88.7 g EMC immunity of interference acc. to EN 61000-6-2, EN 61131-2, marine applications EMC emission of interference acc. to EN 61000-6-3, EN 61131-2, marine applications Approvals Conformity marking 1 Marine applications BV, GL r UL 508 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 - D-32385 Minden Tel.: +49(0)571/887-0 E-Mail: info wago.com Subject to design changes 12.05.2015 Hansastr. 27 - D-32423 Minden Fax: +49(0)571/887-169 www.wago.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for wago manufacturer: Other Similar products are found below : 750-460 231-118/026-000 231-303/026-000 231-620/019-000 257-403 280-438 280-831 284-624 210-111 231-303/037-000 231-446/001- 000 NR 232-216/026-000 234-510 264-726 280-339 0283-0671 830-800/000-305 750-512 750-455 51251782 286-312 713-1428/107-000 731-138/048-000 750-459 750-517 793-3505 826-172 859-304 280-335 231-535/001-000 2604-1106 2604-1504 2606-1103/020-000 2624- 1103 2626-3103/020-000 821-104 713-1107 852-1411 2106-1307 2116-5307 832-1205 832-3604 2009-110 281-512/281-501 286-336 750-421 750-838 753-559 750-1505 787-732