Data sheet Weidmller Interface GmbH & Co. KG OMNIMATE Signal - series BC/SC 3.81 Klingenbergstrae 16 SCDN 3.81/06/90F 3.2SN OR BX D-32758 Detmold Germany Fon: +49 5231 1429-0 Fax: +49 5231 14292083 www.weidmueller.com Extra flat two-tier SCDN pin header for wave soldering. Two compact interfaces are used with the flat BCF 3.81 (PUSH IN) socket block. Available as 90 (recumbent). Connections on a single level, allowing access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmller s 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. General ordering data Type SCDN 3.81/06/90F 3.2SN OR BX Order No. 1040970000 Version PCB plug-in connector, male header, Flange, THT solder connection, 3.81 mm, No. of poles: 6, 90, Solder pin length (l): 3.2 mm, tinned, Orange, Box GTIN (EAN) 4032248769810 Qty. 50 pc(s). Product data IEC: 320 V / 17.5 A UL: 300 V / 10 A Packaging Box Creation date September 19, 2017 7:50:55 AM CEST Catalogue status 18.09.2017 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG OMNIMATE Signal - series BC/SC 3.81 Klingenbergstrae 16 SCDN 3.81/06/90F 3.2SN OR BX D-32758 Detmold Germany Fon: +49 5231 1429-0 Fax: +49 5231 14292083 www.weidmueller.com Technical data Dimensions and weights Net weight 4.17 g System specifications Product family OMNIMATE Signal - series Type of connection BC/SC 3.81 Board connection Mounting onto the PCB THT solder connection Pitch in mm (P) 3.81 mm Pitch in inches (P) 0.15 inch Outgoing elbow 90 No. of poles 6 Number of solder pins per pole 1 Solder pin length (l) 3.2 mm Solder pin length tolerance +0,02 / -0,02 mm Tolerance of solder pin position 0.1 mm Solder pin dimensions d = 1.0 mm, Octagonal Solder pin dimensions = d tolerance 0 / -0,03 mm Solder eyelet hole diameter (D) 1.2 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm L1 in mm 7.62 mm L1 in inches 0.3 inch Number of rows 2 Pin series quantity Touch-safe protection acc. to DIN VDE 2 57 106 Safe from finger touch Touch-safe protection acc. to DIN VDE Volume resistance 0470 IP 20 6.00 m Can be coded Yes Plugging cycles 25 Packaging Box Material data Insulating material PA GF Colour Orange Colour chart (similar) RAL 2000 Insulating material group II 8 CTI Insulation resistance 550 10 UL 94 flammability rating V-0 Contact material Copper alloy Contact surface tinned Storage temperature, min. -25 C Storage temperature, max. 55 C Max. relative humidity during storage 80 % Operating temperature, min. -50 C Operating temperature, max. 120 C Temperature range, installation, min. -25 C Temperature range, installation, max. 120 C Rated data acc. to IEC tested acc. to standard Rated current, min. no. of poles (Ta = IEC 60664-1, IEC 61984 20C) 17.5 A Rated current, max. no. of poles (Ta = Rated current, min. no. of poles (Ta = 20C) 13.2 A 40C) 17 A Rated current, max. no. of poles (Ta = Rated voltage for surge voltage class / 40C) 12.2 A pollution degree II/2 320 V Rated voltage for surge voltage class / Rated voltage for surge voltage class / pollution degree III/2 160 V pollution degree III/3 160 V Rated impulse voltage for surge voltage Rated impulse voltage for surge voltage class/ pollution degree II/2 2.5 kV class/ pollution degree III/2 2.5 kV Rated impulse voltage for surge voltage Short-time withstand current resistance class/ contamination degree III/3 2.5 kV 3 x 1s with 76 A Rated data acc. to CSA Rated voltage (Use group B) 300 V Rated voltage (use group D) 300 V Rated current (use group B) 11 A Rated current (use group D) 11 A Creation date September 19, 2017 7:50:55 AM CEST Catalogue status 18.09.2017 / We reserve the right to make technical changes. 2