Data sheet Weidmller Interface GmbH & Co. KG ZDU 4/3AN Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Product image To feed through power, signal, and data is the classical requirement in electrical engineering and panel building. The insulating material, the connection system and the design of the terminal blocks are the differentiating features. A feed-through terminal block is suitable for joining and/or connecting one or more conductors. They could have one or more connection levels that are on the same potential or insulated against one another. General ordering data Version Feed-through terminal, Tension-clamp connection, 4 mm, 800 V, 32 A, dark beige Order No. 7904180000 Type ZDU 4/3AN GTIN (EAN) 4008190575953 Qty. 50 pc(s). Creation date March 26, 2022 6:36:20 AM CET Catalogue status 11.03.2022 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG ZDU 4/3AN Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Technical data Dimensions and weights Depth 43 mm Depth (inches) 1.693 inch Depth including DIN rail 43.5 mm Height 83.5 mm Height (inches) 3.287 inch Width 6.1 mm Width (inches) 0.24 inch Net weight 15.64 g Temperatures Storage temperature Operating temperature range For operating temperature range see EC Design Test Certificate / IEC Ex- -25 C...55 C Certificate of Conformity Continuous operating temp., min. -60 C Continuous operating temp., max. 130 C Material data Material Wemid Colour dark beige UL 94 flammability rating V-0 Rating data IECEx/ATEX Certificate No. (ATEX) DEMKO15ATEX1467U Certificate No. (IECEX) IECEXULD15.0008U Max. voltage (ATEX) 550 V Current (ATEX) 28 A Wire cross section max. (ATEX) 6 mm Max. voltage (IECEX) 550 V Current (IECEX) 28 A Wire cross section max. (IECEX) 6 mm Operating temperature range For operating temperature Marking EN 60079-7 range see EC Design Test Certificate / IEC Ex- Certificate of Conformity Ex eb II C Gb Ex 2014/34/EU label II 2 G D System specifications Version Tension-clamp connection, End cover plate required for plug-in cross-connector, One end without connector Yes Number of levels 1 Number of clamping points per level 3 Number of potentials per tier 1 Levels cross-connected internally No PE connection No Rail TS 35 Additional technical data Explosion-tested version Yes Installation advice Direct mounting Number of similar terminals 1 Open sides right Type of mounting Snap-on CSA rating data Certificate No. (CSA) 200039-1152892 Current size B (CSA) 35 A Current size C (CSA) 35 A Current size D (CSA) 5 A Voltage size B (CSA) 600 V Voltage size C (CSA) 600 V Voltage size D (CSA) 600 V Wire cross section max. (CSA) 10 AWG Wire cross section min. (CSA) 26 AWG Creation date March 26, 2022 6:36:20 AM CET Catalogue status 11.03.2022 / We reserve the right to make technical changes. 2