SSB L002-L003 GB.qxd 22.10.2003 13:27 Uhr Seite 3 Empty housings EG 1 housing EG 6 housing are 18 mm wide and offer 4 screw connections. They also have a bus-compatible contact carrier. The bus connection is have up to 4 solder/flat push-on lugs 0.8 x 2.8 mm or achieved by abutting several enclosures in a row. 32 connec- 0.8 x 4.8 mm. Inside the enclosure, the busbar or screw termi- tions on either side of the enclosures act as spring-type strip nal ends with a solder eyelet. Two end plates close the mod- contacts. The enclosure can accommodate a PCB measuring ule. The modules are fitted in rows on mounting rail TS 32, 100 x 120 mm. The PCB is adapted by a VG 64 DIN socket. TS 35 x 7.5 or TS 35 x 15, depending on the type. The front plate is screwed to the PCB, like 19 systems. The clip-on foot allows easy assembly in rows on mounting rails TS 35 x 7.5 or TS 35 x 15. EG 2 housing have the same outer contour as type EG 1. The PCBs, Individual components for RS 70 clip-in base equipped with 4 screw or up to 8 spade connectors 0.8 x 6.3 mm or 0.8 x 2.8 mm, are simply clipped into the Any type of intermediate spacers or feet can be joined and enclosure, using mounting rails TS 32, TS 35 x 7.5 or clipped together between two side pieces (locking feet). This TS 35 x 15. produces a holder module for a PCB to which various compo- nents can be soldered. The assembly can be clipped onto mounting rails TS 32, TS 35 x 7.5 or TS 35 x 15. EG 3 housing are 22.5 mm wide with 6 screw or 12 spade connectors Clip-in base profiles 0.8 x 6.3 mm or 0.8 x 2.8 mm. As optional accessories, Weidmller offers a contour PCB with 2.54 mm hole matrix or Profiles RS 45, RS 80 and RS 100 are supplied as extruded completely copper-coated. The clip-on combination foot is profiles 2 m long. The extruded profiles can be easily cut to ideal for mounting in rows on mounting rail TS 32, TS 35 x 7.5 the required length, producing a holder module for a PCB to or TS 35 x 15. The enclosure can be fixed directly using which individual components can be soldered. The locking mounting plate MPL (without mounting rail). Thanks to the feet are pushed into the profiles for clipping onto the mounting push-on foot design, the EG 3 housing enclosure can be rails TS 32, TS 35 x 7.5 or TS 35 x 15. The push-on foot turned at an angle of 180 for all kinds of assembly (e.g. for design of RS 80 lets the locking foot turn at an angle of 180. swapping input and output). DK 4 and DKT 4 terminals EG 4 housing are ideal for installation of electronic components with a maxi- offer the same width 22.5 mm as type EG 3. The greater mum thickness of 4.5 mm. Up to 4 independent clamping depth of 75 mm and height of 109 mm allow more complex yoke screw connections are available. A clip-on frame extends circuitry. The installed circuitry can be connected via 6 screw the installation space of DK 4 by 6 mm. The terminals will fit connectors. The clip-on combination foot is ideal for mounting on mounting rails TS 32, TS 35 x 7.5 or TS 35 x 15, depend- in rows on mounting rail TS 32, TS 35 x 7.5 or ing on type. TS 35 x 15. Thanks to the push-on foot design, the EG 4 housing enclosure can be shifted 6 mm forwards or back from WDK 2.51 terminals the clip-on foot position, turned at an angle of 180, then refitted (e.g. for swapping input and output). are ideal for installation of electronic components with a maxi- mum thickness of 4 mm. 4 independent clamping yoke screw connections or 4 spade connectors 6.3 x 0.8 mm are avail- EG 5 housing able. The terminals will fit on mounting rails TS 35 x 7.5 or have the same outer dimensions as type EG 4. Type EG 5 has TS 35 x 15. L 12 screw connections wired with solder eyelets inside the enclosure. The clip-on combination foot is ideal for mounting in rows on mounting rail TS 32, TS 35 x 7.5 or TS 35 x 15. Thanks to the push-on foot design, the EG 5 housing enclo- sure can be shifted 6 mm forwards or back from the clip-on foot position, turned at an angle of 180, then refitted (e.g. for swapping input and output). L.3 Empty housingsSSB L003-L026 GB 22.10.2003 14:21 Uhr Seite L.10 Housings EG EG 3 An EG3 housing consists of: 1 housing frame, 1 combination foot or 1 mounting plate, 1 to 2 clamping yoke units, 2 end plates. Connection tab push-on lugs are available if required. Technical data General data Dimensions W x L x H (w. TS35 x 7.5) mm 22.5 / 58 / 91 The fixing in combination foot or the mounting Dimensions W x L x H (w. TS32) 22.5 / 58 / 95 plate allows the housing to be mounted on the rail No. of connections total 6 or directly. left / right / top 3/3 Access for calibration Shielding not available Contact to the mounting rail - Max. power loss 1.5 W Number of PCB per module 1 PCB-connection soldered connection, via wire Thickness of PCB 1.0 (+ 0.2) mm Class of protection IP 20 Tightening torque range 0.40.8 Nm Stripping length Pollution severity 2 Flammability class acc. UL94 V2 Colour of insulating material beige Clampable conductors (H05V/H07V) Clamp. yoke connection Solid 0.54 Flexible 0.52.5 Max. conductor AWG Plug gauge to 60947-1 Information Ordering data Type Qty. Order No. Individual parts GH EG3 A.1 M.1 BOHR. BE 25 0163960000 Housing frame without foot w. foot for TS35 w. foot for TS32 RKF EG3 BE 20 0163860000 Locking combination foot MP EG3/DB BE 50 0158560000 Mounting plate for direct mounting AP EG3 20 0133760000 End plate ZBE EG 3 50 0138360000 Clamp. yoke unit right ZBE EG 3 50 0138360000 left Intermediate plate VBZA F.EG 50 0510260000 Connection spigot STECKERFAHNE EG 35/2 100 0496100000 Flat connector lug 0.8 x 6.3mm STFA EG3 50 0163500000 2 x 0.8 x 6.3mm L 0.8 x 2.8mm 0.8 x 4.8mm Information Accessories Type Qty. Order No. Articles with coloured order number are kept permanently in stock at the central warehouse in Germany. L.10L.10 Delivery times see page X.2 Housings