Data sheet Weidmller Interface GmbH & Co. KG W-Series Klingenbergstrae 16 WTR 2.5 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Klippon Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon Connect provides a proven response to a range of different requirements. General ordering data Type WTR 2.5 Order No. 1855610000 Version Test-disconnect terminal, Screw connection, 2.5 mm, 500 V, 24 A, Pivoting, Dark Beige GTIN (EAN) 4032248458417 Qty. 100 pc(s). Creation date August 10, 2016 10:22:52 AM CEST Catalogue status 29.07.2016 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG W-Series Klingenbergstrae 16 WTR 2.5 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width 5.1 mm Width (inches) 0.201 inch Height 60 mm Height (inches) 2.362 inch Depth 48 mm Depth (inches) 1.89 inch Depth including DIN rail 49 mm Net weight 8.01 g Temperatures Continuous operating temp., min. -50 C Continuous operating temp., max. 120 C Material data Material Wemid Colour Dark Beige UL 94 flammability rating V-0 System specifications Version Screw connection, End cover plate required Disconnection element, for plug-in cross-connector, One end without connector Yes Number of potentials 1 Number of levels 1 No. of clamping points per level 2 Number of potentials per tier 1 Levels cross-connected internally No PE connection No Mounting rail TS 35 N-function No PE function No PEN function No 2 clampable conductors (H05V/H07V) with equal cross-section (rated connection) Wire connection cross section, finely Wire cross-section, finely stranded, two stranded, two clampable wires, min. 0.5 mm clampable wires, max. 1.5 mm Wire connection cross section, finely Wire connection cross section, finely stranded with wire-end ferrules DIN stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min. 0.5 mm 46228/1, 2 clampable wires, max. 1.5 mm Additional technical data Explosion-tested version No Open sides right Type of mounting Snap-on CSA rating data Certificate No. (CSA) 154685-1152890 Current size C (CSA) 10 A Voltage size C (CSA) 300 V Wire cross section max. (CSA) 12 AWG Wire cross section min. (CSA) 26 AWG Creation date August 10, 2016 10:22:52 AM CEST Catalogue status 29.07.2016 / We reserve the right to make technical changes. 2