D
WIMA MKS 2
Metallized Polyester (PET) Capacitors in PCM 5 mm.
Capacitances from 0.01 mF to 10 mF. Rated Voltages from 50 VDC to 630 VDC.
Special Features Electrical Data
High volume/capacitance ratio Capacitance range: Test specifications:
Self-healing 0.01 mF to 10 mF (E12-values on request) In accordance with IEC 60384-2
AEC-Q200 qualified Rated voltages: Test voltage: 1.6 U , 2 sec.
r
According to RoHS 2011/65/EU 50 VDC, 63 VDC, 100 VDC, 250 VDC, Voltage derating:
400 VDC, 630 VDC A voltage derating factor of 1.25 % per K
Capacitance tolerances: must be applied from +85+ C for DC
Typical Applications
20%, 10%, 5% voltages and from +75+ C for AC
Operating temperature range: voltages
For general DC-applications e.g.
U = 50 VDC: 55+ C to +100+ C Reliability:
By-pass r
U 63 VDC: 55+ C to +125+ C Operational life 300 000 hours (+125 C
Blocking r
Climatic test category: permitted for 1000 hours max. distributed
Coupling and decoupling
55/100/21 in accordance with IEC over the entire operating life)
Timing
Insulation resistance at +20+ C: Failure rate 2 fit (0.5 x U and 40) C)
r
Construction
U U C 0.33 mF 0.33 mF < C 10 mF
r test
3
50 VDC 10 V 5 x 10 M 1000 sec (M x mF)
Dielectric:
4
63 VDC 50 V 1 x 10 M 1250 sec (M x mF)
Polyethylene-terephthalate (PET) film
4
Capacitor electrodes: 100 VDC 100 V 1.5 x 10 M 3000 sec (M x mF)
Vacuum-deposited
Measuring time: 1 min.
Internal construction:
Dissipation factors at + 20) C: tan
d
at f C 0.1 mF 0.1 mF < C 1.0 mF C > 1.0 mF
Plastic film
-3 -3 -3
1 kHz 8 x 10 8 x 10 10 x 10
Vacuum-deposited -3 -3
10 kHz 15 x 10 15 x 10
electrode
Metal contact layer -3
100 kHz 30 x 10
(schoopage)
Maximum pulse rise time: for pulses equal to the rated voltage
Terminating wire
Pulse rise time V/msec
Capacitance
max. operation/test
mF
50 VDC 63 VDC 100 VDC 250 VDC 400 VDC 630 VDC
0.01 ... 0.022 35/350 35/350 50/500 80/800 110/1100
Encapsulation:
0.033 ... 0.068 20/200 25/250 50/500 80/800 90/900
Solvent-resistant, flame-retardant plastic
0.1 ... 0.47 10/100 15/150 20/200 50/500 80/800
case with epoxy resin seal, UL 94 V-0
0.68 ... 1.0 8/80 12/120 15/150 25/250
Terminations:
1.5 ... 3.3 8/80 7.5/75 10/100
Tinned wire.
4.7 5/50 5/50
Marking:
6.8 3/30 3/30
Colour: Red. Marking: Silver/White.
10 2.5/25
Mechanical Tests Packing
Pull test on pins: Available taped and reeled.
10 N in direction of pins according to
IEC 60068-2-21 Detailed taping information and graphs
Vibration: at the end of the catalogue.
6 hours at 10 ... 2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
2
4000 bumps at 390 m/sec in For further details and graphs please
accordance with IEC 60068-2-29 refer to Technical Information.
44
01.19D
WIMA MKS 2WIMA FKP 4
Continuation
General Data
50 VDC/30 VAC* 63 VDC/40 VAC*
Capacitance
W H L PCM** Part number W H L PCM** Part number
0.01 mF 2.5 6.5 7.2 5 MKS2C021001A00_ _ _ _
0.015 2.5 6.5 7.2 5 MKS2C021501A00_ _ _ _
0.022 2.5 6.5 7.2 5 MKS2C022201A00_ _ _ _
0.033 2.5 6.5 7.2 5 MKS2C023301A00_ _ _ _
0.047 2.5 6.5 7.2 5 MKS2C024701A00_ _ _ _
0.068 2.5 6.5 7.2 5 MKS2C026801A00_ _ _ _
0.1 mF 2.5 6.5 7.2 5 MKS2C031001A00_ _ _ _
0.15 2.5 6.5 7.2 5 MKS2C031501A00_ _ _ _
0.22 3 7.5 7.2 5 MKS2C032201B00_ _ _ _
0.33 2.5 6.5 7.2 5 MKS2B033301A00_ _ _ _ 3.5 8.5 7.2 5 MKS2C033301C00_ _ _ _
0.47 3 7.5 7.2 5 MKS2B034701B00_ _ _ _ 3.5 8.5 7.2 5 MKS2C034701C00_ _ _ _
0.68 3.5 8.5 7.2 5 MKS2B036801C00_ _ _ _ 4.5 9.5 7.2 5 MKS2C036801E00_ _ _ _
1.0 mF 3.5 8.5 7.2 5 MKS2B041001C00_ _ _ _ 5 10 7.2 5 MKS2C041001F00_ _ _ _
1.5 4.5 9.5 7.2 5 MKS2B041501E00_ _ _ _ 5.5 11.5 7.2 5 MKS2C041501H00_ _ _ _
2.2 5 10 7.2 5 MKS2B042201F00_ _ _ _ 7.2 13 7.2 5 MKS2C042201K00_ _ _ _
3.3 5.5 11.5 7.2 5 MKS2B043301H00_ _ _ _ 7.2 13 7.2 5 MKS2C043301K00_ _ _ _
4.7 7.2 13 7.2 5 MKS2B044701K00_ _ _ _ 8.5 14 7.2 5 MKS2C044701M00_ _ _ _
6.8 8.5 14 7.2 5 MKS2B046801M00_ _ _ _ 11 16 7.2 5 MKS2C046801N00_ _ _ _
10 mF 11 16 7.2 5 MKS2B051001N00_ _ _ _
100 VDC/63 VAC* 250 VDC/160 VAC*
Capacitance
W H L PCM** Part number W H L PCM** Part number
0.01 mF 2.5 6.5 7.2 5 MKS2D021001A00_ _ _ _ 2.5 6.5 7.2 5 MKS2F021001A00_ _ _ _
0.015 2.5 6.5 7.2 5 MKS2D021501A00_ _ _ _ 2.5 6.5 7.2 5 MKS2F021501A00_ _ _ _
0.022 2.5 6.5 7.2 5 MKS2D022201A00_ _ _ _ 2.5 6.5 7.2 5 MKS2F022201A00_ _ _ _
0.033 2.5 6.5 7.2 5 MKS2D023301A00_ _ _ _ 3.5 8.5 7.2 5 MKS2F023301C00_ _ _ _
0.047 2.5 6.5 7.2 5 MKS2D024701A00_ _ _ _ 3.5 8.5 7.2 5 MKS2F024701C00_ _ _ _
0.068 2.5 6.5 7.2 5 MKS2D026801A00_ _ _ _ 3.5 8.5 7.2 5 MKS2F026801C00_ _ _ _
0.1 mF 2.5 6.5 7.2 5 MKS2D031001A00_ _ _ _ 4.5 9.5 7.2 5 MKS2F031001E00_ _ _ _
0.15 3.5 8.5 7.2 5 MKS2D031501C00_ _ _ _ 5 10 7.2 5 MKS2F031501F00_ _ _ _
0.22 3.5 8.5 7.2 5 MKS2D032201C00_ _ _ _ 5.5 11.5 7.2 5 MKS2F032201H00_ _ _ _
0.33 4.5 9.5 7.2 5 MKS2D033301E00_ _ _ _ 7.2 13 7.2 5 MKS2F033301K00_ _ _ _
0.47 4.5 9.5 7.2 5 MKS2D034701E00_ _ _ _ 8.5 14 7.2 5 MKS2F034701M00_ _ _ _
0.68 5 10 7.2 5 MKS2D036801F00_ _ _ _ 11 16 7.2 5 MKS2F036801N00_ _ _ _
1.0 mF 7.2 13 7.2 5 MKS2D041001K00_ _ _ _
1.5 8.5 14 7.2 5 MKS2D041501M00_ _ _ _
2.2 11 16 7.2 5 MKS2D042201N00_ _ _ _
* AC voltage: f = 50 Hz; 1.4 x U + UDC U
rms r
Part number completion:
** PCM = Printed circuit module = pin spacing.
W L
Tolerance: 20 % = M
Dims. in mm.
H
10 % = K
5 % = J
6 -2
Packing: bulk = S
d
Pin length: 6-2 = SD
5
PCM
Taped version see page 149.
at thepin exit points
d = 0.5 P
(0 .5)
Rights reserved to amend design data without prior notification.
Continuation page 46
45
01.19