Dimensions: mm Recommended Land Pattern: mm Absolute Maximum Ratings (Ambient Temperature 25C): Properties Test conditions Value Unit 3,25 0,15 4,0 Power Dissipation P 2.66 W 1,3 0,15 Diss 3,25 Peak Forward Current duty/ 10 1 kHz I 1000 mA F Peak 0,48 Continuous Forward Current I 1000 mA 1,30 F Reverse Voltage V 5 V REV 1 2 ESD Threshold/ Human Body V 8000 V Model ESD HBM Absolute Thermal Resistance R 8 K/W Junction to Solder Point JS 0,48 0,15 Thermal pad Junction Temperature T 150 C J 3,4 0,15 O 2,6 0,15 Optical Properties: Scale - 8:1 Chip Technology InGaN Emitting Color Green Schematic: Lens Type Dome Lens Waterclear General Information: Operating Temperature -40 C up to +125 C Storage Conditions -40 C up to +125 C, 60% RH max. - + Moisture Sensitive Level MSL 2 1 2 Protection device Polarity Mark (Cathode) Scale - 8:1 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions KaS ZAn DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany WL-SMDC SMD Mono-color Tel. +49 (0) 79 42 945 - 0 ORDER CODE Ceramic LED Waterclear www.we-online.com 150353GS74500 eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 002.000 Valid 2017-12-15 eiPal 1/10 3535 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 3,4 0,15 3,25 0,15 0,77 0,15 2,1 0,15 0,50 3,25Electrical & Optical Properties: Viewing Angle: Value Properties Test conditions Unit min. typ. max. Peak Wavelength 350 mA 520 nm Peak Dominant Wavelength 350 mA 525 nm Dom Luminous Flux 350 mA 75 85 lm V Forward Voltage 350 mA V 3.4 3.8 V F Spectral Bandwidth 350 mA 35 nm Viewing Angle Phi 0 350 mA 2 125 50% 0 - 62,5 10 100 20 30 90 40 80 45 70 50 60 50 60 62,5 40 70 30 20 80 10 90 -90 -45 0 10 20 30 40 50 60 70 80 90 100 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions KaS ZAn DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany WL-SMDC SMD Mono-color Tel. +49 (0) 79 42 945 - 0 ORDER CODE Ceramic LED Waterclear www.we-online.com 150353GS74500 eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 002.000 Valid 2017-12-15 eiPal 2/10 3535 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Relative Luminous Intensity (%)