Dimensions: mm Note: Because of manufacturing matters, our Ribbon flat cable reels might be cut into two pieces. Please note that Wrth Elektronik wont accept any complaint or replacement about that. L Pl 1,00 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION Article Properties: METHOD PiM 001.002 2020-02-14 DIN ISO 2768-1m Properties Value Unit Tol. DESCRIPTION Pins 20 WR-CAB Ribbon Flat Cable P Pin to Pin (Middle) 19 mm 0.15mm Wrth Elektronik eiSos GmbH & Co. KG l ORDER CODE EMC & Inductive Solutions Length L 20 mm +0.15mm/-0.2mm Max-Eyth-Str. 1 63902015621 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 1.00 mm eiCan Valid 1/4 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 0,90 0.10Kind Properties: Wire Properties: Properties Value Unit Properties Value Unit Pitch P 1 mm Stranded Wire Section (Metric) 0.089 (mm) Number of Strands 7 Material Properties: Diameter of single Strand 0.13 mm Insulator Material PVC Certification: Insulator Color Grey with Red Marking on 1st Conductor Conductor Material Copper RoHS Approval Compliant 2011/65/EU&2015/863 Conductor Plating Tin REACh Approval Conform or declared (EC)1907/2006 cULus Approval E328849 General Information: UR AWM 2651 VW-1 105C 300V 28 AWG WUERTH ELEKTRONIK 298 cUR AWM I A/B 105C 300V FT1 FT2 Operating Temperature -25 up to +105 C Packaging Properties: Flame Test VW-1 IEC 332-1 Style UL 2651 Packaging Tape and Reel Packaging Unit 1 Electrical Properties: 1 piece = 1 Reel of 30.48m Properties Test conditions Value Unit Tol. I Rated Current 1 A max. R Rated Voltage V 300 V (RMS) R Withstanding Voltage 1 min 2000 V (AC) min. R Insulation Resistance 1 Kilometer 100 M min. ISO Signal Delay 1 Meter 4.65 ns Conductor Resistance R 1 Kilometer 237 max. Unbalanded Capacity 1 Meter 56 pF Unbalanced Impedance 90 Unbalanced Inductance 1 Meter 1.45 H Wire Properties: Properties Value Unit Stranded Wire Section (AWG) 28 (AWG) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PiM 001.002 2020-02-14 DIN ISO 2768-1m DESCRIPTION WR-CAB Ribbon Flat Cable Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 63902015621 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 1.00 mm eiCan Valid 2/4 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.