Dimensions: mm Recommended Land Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. 2,8 Inductance L 100 kHz/ 100 mV 10 H 20% 0,8 Z Maximum Impedance 10000 max. max 1 Solder Resist Rated Current T = 40 K 1100 mA max. DC Resistance R 0.12 max. 3 4 DC 2 1 V Insulation Test Voltage 250 V (AC) T 2 1 V Rated Voltage 80 V max. R 3 4 2,7 0,1 No vias and traces in restricted area 7,3 0,4 Scale - 3:1 Schematic: 1 0,1 General Properties: It is recommended that the temperature of the component does not exceed +125 C under worst case conditions 1 2 3 Storage Conditions (in original < 40 C < 75 % RH packaging) 2 1 4 Moisture Sensitivity Level (MSL) 1 Scale - 3:1 Product Marking: Start of Winding - Indicates top left corner CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD Marking C forCommon Mode Chok SSt 002.011 2021-11-05 DIN ISO 2768-1m Marking C100 (Inductance Code) DESCRIPTION WE-SCC SMT Common Mode Line Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Filter Max-Eyth-Str. 1 744281100 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 7345 eiSos Valid 1/7 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 7,3 0,4 4 0,2 4,8 max. 2,2 3,1 7,5Typical Impedance Characteristics: Test Setup: 100000 10000 1000 100 10 1 0.1 1 10 100 Frequency MHz Z (comm) Z (diff) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD SSt 002.011 2021-11-05 DIN ISO 2768-1m DESCRIPTION WE-SCC SMT Common Mode Line Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Filter Max-Eyth-Str. 1 744281100 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 7345 eiSos Valid 2/7 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Impedance