A Dimensions: mm B Recommended land pattern: mm D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 100 kHz/ 10 mA L 100 nH 20% Rated inductance 100 kHz/ 10 mA/ 24 A L 100 nH typ. R Rated current T = 40 K I 24.0 A max. R Saturation current L/L < 20% I 52.0 A typ. sat DC Resistance 20C R 0.170 m 7% DC Self resonant frequency f 105 MHz typ. res C Schematic: E General information: It is recommended that the temperature of the part does not exceed 125C under worst case operating conditions. Ambient temperature: -40C to +85C (refering to I ) R Operating temperature: -40C to +125C Storage temperature (on tape & reel): -20C to +40C 75% RH max. Test conditions of Electrical Properties: 20C, 33% RH if not specified differently DESCRIPTION Reference on drawing Description 2.4 2015-03-04 SSt BD Marking 744304010 (Article Number) WE-HCM SMD High Current Flat Wire 2.3 2014-09-16 SSt BD Date code YYWW Wrth Elektronik eiSos GmbH & Co. KG Inductor EMC & Inductive Solutions 2.2 2014-02-06 SSt BD Max-Eyth-Str. 1 2.1 2013-12-11 SSt SSt 74638 Waldenburg Order.- No. SIZE Germany 2.0 2013-06-20 SSt BD Tel. +49 (0) 79 42 945 - 0 www.we-online.com 744304010 A4 1.0 2009-08-09 RST - eiSos we-online.com REV DATE BY CHECKED Size: 1240 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.F1 Typical Inductance vs. Current Characteristics: F2 Typical Temperature Rise vs. Current Characteristics: DESCRIPTION 2.4 2015-03-04 SSt BD WE-HCM SMD High Current Flat Wire 2.3 2014-09-16 SSt BD Wrth Elektronik eiSos GmbH & Co. KG Inductor EMC & Inductive Solutions 2.2 2014-02-06 SSt BD Max-Eyth-Str. 1 2.1 2013-12-11 SSt SSt 74638 Waldenburg Order.- No. SIZE Germany 2.0 2013-06-20 SSt BD Tel. +49 (0) 79 42 945 - 0 www.we-online.com 744304010 A4 1.0 2009-08-09 RST - eiSos we-online.com REV DATE BY CHECKED Size: 1240 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.